Претраживање
Приказ резултата 3301-3310 од 3335
Some properties of the class U
(UMCS, 2019)
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...
Implementation of Land Readjustment in Serbia – Based on Experiences in the City of Bor
(Faculty of Civil Engineering and Architecture, University of Nis, 2022)
The paper presents the process of implementing land readjustmentin the Republic of Serbia from the initial thinking, through the intensification of research and pilot projects to the first projects that are implemented in ...
Measurement Methods for Residual Stresses in CWR
(Advances in Intelligent Systems and Computing, 2019)
Continuously welded rails are a part of the track structure since the
1950s. Total stresses in continuously welded rails include residual stresses gen-
erated during the manufacturing process as well as the service life ...
A method of determining parameters of Bofang model on the example of "Bileca" reservoir
(Građevinski fakultet Subotica, 2019)
In this research paper, measurement data of air and water temperatures and
water levels for "Bileca" reservoir for a period between 1967. and 2017. are presented.
Based on the averaged measurement data values, an ...
3D Cadastral Data in The Process of Urban Planning
(Faculty of Civil Engineering and Architecture, University of Nis, 2022)
Cadastral data are very important in the process of urban planning. Moreover, cadastral data present a spatial base for urban planning decisions. Over the last few decades, research on 3D cadastres have been performed ...
Univalence of quotient of analytic functions
(Elsevier, 2014)
Starlikeness of sections of univalent functions
(Rocky Mountain Mathematics Consortium, 2014)
Let S be the class of all normalized analytic
and univalent functions in the unit disk D. In this paper, we
determine condition so that each section sn(f, z) of f ∈ S is
starlike in the disk |z| < rn. In particular, ...
Determination of the temperature transfer function of building constructions based on measurement data
(Materials Research Society of Serbia, 04-01-2015)
In this paper a method of determination of transfer function for temperature measured inside and outside residential building in Belgrade is presented. The instantaneous measurements of indoor temperature inside a living ...
Measurement and modeling of thermal conductivity of loess at the location of the Airport Nikola Tesla in Surcin
(5th Symposium of the Macedonian Association for Geotechnics, Ohrid, North Macedonia, 2022., 2022)
The thermal conductivity of a material is the parameter that is most reliably
determined experimentally. The problem of determining the thermal conductivity
in the soil is greater because the soil is heterogeneous, so ...