Search
Now showing items 31-40 of 2201
Experimental investigation of scour and pressures on a single span arch bridge under inundation
(Utah State University, 2018)
This paper presents two experiments, carried out in a 605mm-wide flume, to investigate scour and hydrodynamic pressure on a scaled model of a single span arch bridge. The geometry of the bridge model is scaled down according ...
Analisys of sources of information on technology for project managers in civil engineering
(Faculty of Civil Engineering University of Zagreb, 2013)
In everyday work, civil engineers are forced to search for technological information. Out of the many available sources of information, there is no one perfect source. The speed of finding the required information has often ...
Absolute Time Series GNSS Point Positioning-Data Cleaning and Noise Characterization
(Strojarski fakultet u Slavonskom Brodu, 2020)
Time series data of GNSS point positioning are considerably used for the purpose of geophysical research. The velocity estimates and their uncertainties derive from time series data of GNSS point positioning affected by ...
Building a Construction Project Key-Phrase Network from Unstructured Text Documents
(American Society of Civil Engineers (ASCE), 2017)
During a construction project lifecycle, an extensive corpus of unstructured or semistructured text documents is generated. The nature of unstructured sources impedes users' acquisition, analysis, and reuse of relevant ...
Integration of Materials Science-based Performance Models into PMS
(Wiley Blackwell, 2016)
The integration of materials science-based performance models obtained from laboratory performance testing and modeling into the lifecycle assessment of road pavements is a futureoriented approach for the improvement of ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Possibilities of building structures using exposed concrete factors of influence
(Macedonian Association of Structural Engineers, Skopje, 2015)
Frequency- and time-domain methods related to flutter instability problem / Metode analize flatera u frekventnom i vremenskom domenu
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2014)
Bridge flutter phenomenon presents an important criterion of instability, which should be considered in the bridge design phase. This paper presents different bridge flutter methods which can be used to solve the flutter ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Кartiranje parametra metode Langbajna za proračun srednjih voda na neizučenim slivovima na teritoriji Srbije
(Vodoprivreda, 2019)
U radu se razmatra određivanje srednjih voda na malim neizučenim slivovima u okviru teritorije Republike Srbije, na kojima ne postoje hidrološki podaci o mere-nim protocima. Razmatrana je metoda Langbajna u kojoj je ...