Претраживање
Приказ резултата 11-20 од 89
Application of layered finite elements in the numerical analysis of laminated composite and sandwich structures with delaminations / Primena slojevitih konačnih elemenata u numeričkoj analizi laminatnih kompozitnih i sendvič-ploča i ljuski s delaminacijama
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2015)
Laminar composites are modern engineering materials widely used in the mechanical and civil engineering. In the paper, some recent advances in a numerical analysis of laminated composite and sandwich plates and shells of ...
Bending behaviour of glulam beams reinforced with carbon FRP plates
(Taylor and Francis Ltd., 2015)
The idea of reinforcing glued laminated timber (glulam) beams came in response to the need to improve the mechanical properties, as well as to ensure higher reliability of this type of structural elements. This paper ...
Driver Speed Behavior on Circular Curves of Undivided Two-Lane Rural Roads Serbian and Italian Case Studies
(National Research Council, 2015)
Many researchers have proved that one of the parameters that most influence safe driving is operating speed, defined as the speed at which drivers travel on a dry road in free-flow conditions during daylight hours. This ...
The antimicrobial efficiency of silver activated sorbents
(Elsevier B.V., 2015)
This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials ...
Specific features of stainless steel compression elements
(Union of Croatian Civil Engineers and Technicians, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...
Primena modela razmene količine kretanja u analizi uticaja geometrije i hidrauličkih otpora na osnovne odlike tečenja u koritu za veliku vodu / Study of the influence of channel geometry and hydraulic resistance on flow characteristics in compound channels with the exchange discharge method
(Srpsko društvo za odvodnjavanje i navodnjavanje, 2015)
U radu je sproveden niz numeričkih ogleda sa ciljem da se utvrdi kako geometrija korita za veliku vodu (KVV) i rapavost plavnih površina utiču na razmenu količine kretanja (RKK) između glavnog korita i plavnih površina i ...
Competitive sorption of silver, zinc and copper ions on different types of sorbent / Komparativna sorpcija jona teških metala na različitim tipovima sorbenata
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2015)
In this master thesis the sorption of heavy metals on activated carbon and zeolite was analyzed. The chosen heavy metals (Ag+, Cu2+, Zn2+) have been analyzed separately and as a mixture in order to check their sorption ...
Methodologies for Pre-Validation of Biofilters and Wetlands for Stormwater Treatment
(Public Library of Science, 2015)
Background Water Sensitive Urban Design (WSUD) systems are frequently used as part of a stormwater harvesting treatment trains (e.g. biofilters (bio-retentions and rain-gardens) and wetlands). However, validation frameworks ...
Numerical simulation of levee breach due to overtopping flow
(Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering), 2015)
Modeliranje koncentracije hlora u južnom Beogradskom prigradskom distributivnom sistemu - pravac Lipovica Dražanovac
(Voda i sanitarna tehnika, 2015)