Претраживање
Приказ резултата 51-60 од 89
Transparent PMMA/silica nanocomposites containing silica nanoparticles coating under supercritical conditions
(Progress in Organic Coatings, 2013)
This work reports the preparation of PMMA/silica nanocomposites with high optical transparency and enhanced mechanical properties using a melt compounding method. The surface of SiO2 particles was modified with a ...
Improved real-time data anomaly detection using context classification
(IWA Publishing, 2011)
The number of automated measuring and reporting systems used in water distribution and sewer systems is dramatically increasing and, as a consequence, so is the volume of data acquired. Since real-time data is likely to ...
Free vibration analysis of spatial Bernoulli–Euler and Rayleigh curved beams using isogeometric approach
(Elsevier Inc., 2019)
This paper deals with the linear free vibration analysis of Bernoulli–Euler and Rayleigh curved beams using isogeometric approach. The geometry of the beam as well as the displacement field are defined using the NURBS basis ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Management of bridges with shallow foundations exposed to local scour
(CRC Press/Balkema, 2016)
The Serbian road network includes the large portion of bridges with shallow foundations that are vulnerable to local scour as tragically demonstrated during the extreme flooding in May 2014. In order to enhance preparedness ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
A simplified procedure of metrological testing of the terrestrial laser scanners
(Elsevier B.V., 2014)
This paper presents a simplified test procedure of the terrestrial laser scanners (TLS) accuracy investigation by the general criteria of the ISO17123 standard. The proposed procedure covers investigation, analysis and ...