Претраживање
Приказ резултата 61-70 од 70
Flexural reinforcement of glulam beams with CFRP plates
(Kluwer Academic Publishers, 2016)
In recent years the use of fiber reinforced polymer composites for strengthening and repairing structural elements has significantly increased. This paper shows an experimental study carried out in order to demonstrate the ...
Mathematical model for estimation of the three-dimensional unsteady temperature variation in chilled packaging units
(International Journal of Refrigeration-Revue Internationale Du Froid, 2012)
A mathematical model for heat transfer from surrounding environment to a single food package is developed. A simplified analytical solution for three-dimensional (3D) unsteady temperature distribution in the food package ...
Shear behaviour of recycled aggregate concrete beams with and without shear reinforcement
(Elsevier Ltd, 2017)
An experimental study of the shear behaviour of recycled aggregate concrete (RAC) beams with and without shear reinforcement is presented. Nine full-scale simply supported beams were loaded in four-point bending tests until ...
Free vibration analysis of stiffened and cracked laminated composite plate assemblies using shear-deformable dynamic stiffness elements
(Elsevier Ltd, 2017)
In the paper, the dynamic stiffness method based on the HSDT and FSDT plate theories is applied to study free vibration characteristics of composite stiffened and cracked plate assemblies. The dynamic stiffness matrices ...
Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading
(Materials and Structures, 2013)
Recycling of waste concrete is one of the sustainable solutions for the growing waste disposal crisis and depletion of natural aggregate sources. As a result, recycled concrete aggregate (RCA) is produced, and so far it ...
Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies - Part II: Numerical examples
(Elsevier Ltd, 2017)
The dynamic stiffness elements based on the HSDT and FSDT (and the corresponding dynamic stiffness matrices of a laminated composite plate) have been implemented into the original MATLAB code, and a variety of numerical ...
Comparative environmental assessment of natural and recycled aggregate concrete
(Waste Management, 2010)
Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. ...
Generalized plasticity model for inelastic RCFT column response
(Elsevier Ltd, 2016)
This paper presents a nonlinear 3d concentrated plasticity beam column element for the analysis of RCFT columns. The element consists of a linear elastic component with a plastic hinge at each end whose inelastic response ...
Section Discretization of Fiber Beam-Column Elements for Cyclic Inelastic Response
(Journal of Structural Engineering-Asce, 2012)
The paper presents studies of the effect of the number of material integration points at the monitored sections of fiber beam-column elements on the local response of typical structural cross sections under an extensive ...
Landslide susceptibility assessment using SVM machine learning algorithm
(Engineering Geology, 2011)
This paper introduces the current machine learning approach to solving spatial modeling problems in the domain of landslide susceptibility assessment. The latter is introduced as a classification problem, having multiple ...