Pretraživanje
Prikaz rezultata 1-10 od 18
GNSS and SAR Signal Delay in Perturbed Ionospheric D-Region During Solar X-Ray Flares
(IEEE (Institute of Electrical and Electronics Engineers), 2019)
We investigate the influence of the perturbed (by a solar X-ray flare) ionospheric D-region on the GNSS and SAR signals. We calculate a signal delay in the D-region based on the low ionospheric monitoring by very low ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Rotation-free isogeometric dynamic analysis of an arbitrarily curved plane Bernoulli-Euler beam
(Elsevier Ltd, 2019)
A novel rotation-free isogeometric formulation of in-plane dynamic analysis of an arbitrarily curved Bernoulli-Euler beam in the convective frame of reference is presented. The driving force behind the present study has ...
A comparative environmental impact analysis of asphalt mixtures containing Crumb Rubber and Reclaimed Asphalt Pavement using Life Cycle Assessment
(Taylor&Francis, 2019)
Recently, the reduction of the environmental burdens related to highway infrastructures has been in the spotlight. Within this context, the use of recycled materials in bituminous mixtures for road pavement construction ...
Machine learning based landslide assessment of the Belgrade metropolitan area: Pixel resolution effects and a cross-scaling concept
(Elsevier, 2019)
Improvements of Machine Learning-based landslide prediction models can be made by optimizing scale, customizing training samples to provide sets with the best examples, feature selection, etc. Herein, a novel approach, ...
Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
(Elsevier, 2019)
Reinforced concrete frame structures with masonry infills often exhibit serious damage after earthquake events, as the infills are generally installed without additional constructive measures in contact to the reinforced ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...