Search
Now showing items 1-10 of 130
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...
Application of 3D animation principles and tools in geometrical education
(DRUNPP, Sarajevo, 2013)
Geometrical education using 3D animation principles and tools represents a new methodology approach and its final result is presented on new way,
as multimedia tool. The originality of the paper is based on interdisciplinary ...
Estimating residual value of heavy construction equipment using ensemble learning
(http://cedb.asce.org, 2021)
Knowing the right moment for the sale of used heavy construction equipment is important information for every construction company. The proposed methodology uses ensemble machine learning techniques to estimate the price ...
Technical and Environmental Aspects of Infrastructure Restoration after Destruction of Bridges in the City of Novi Sad
(International Conference on Environmental Recovery of Yugoslavia – ENRY2001, 2001)
This paper deals with the riverbed morphological and environmental changes induced by destruction of bridges in the city of Novi Sad. Different aspects of infrastructure restoration are discussed. The problem of gas pipeline ...
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...
Capturing dam geometry by Lidar and multibeam technology for visualization of structural deformations - Case study Dam Bečej
(Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in BratislavaCroatian Geodetic Society, ZagrebFaculty of Geodesy, University of Zagreb, Croatia, 2020)
Bečej Dam is a concrete dam on the Tisa River, which has been monitored since the 1980s through the monitoring of point-mark position vector changes on the dam body in 2D and 1D coordinate system. Conventional geodetic ...
Bridge damage: Detection, IFC-based semantic enrichment and visualization
(Elsevier, 2020)
Building Information Modeling (BIM) representations of bridges enriched by inspection data will add tremendous value to future Bridge Management Systems (BMSs). This paper presents an approach for point cloud-based detection ...