Search
Now showing items 2481-2490 of 2507
Critical risks in Serbian infrastructure projects
(Proceedings of 11th International Conference: "Organization, Technology and Management in Construction", September 2013, Dubrovnik, Croatia, 2013)
Infrastructure projects are usually followed by numerous standard, but also specific risks associated with project cost, schedule, quality, performance, health and safety aspects, environmental aspects, as well as with ...
Experimental determination of dynamic parameters of heat passage through the facade wall of a weekend cottage on mountain Kopaonik, Serbia
(Faculty of civil engineering and architecture / University of Niš and Serbian academy of sciences and arts - branch in Niš, 2023)
In this paper, using a dynamic RC model for heat transfer in a room on the ground floor,
the three-time constants of heat transfer that corresponds to the different parts of a
weekend cottage on Kopaonik were determined. ...
А practical method for strut-and-tie modelling of the bridge pile cap
(INTERNATIONAL SCIENTIFIC CONFERENCE PLANNING, DESIGN, CONSTRUCTION AND BUILDING RENEWAL - INDIS 2023, 2023)
Pile cap is a typical example of a discontinuity region, where the classical beam theory does not apply. Therefore, strut-and-tie (STM) model is considered appropriate for the analysis of pile caps. Although, the strut-and-tie ...
Polyhedral Forms Obtained by Combinig Lateral Sheet of CP II-10 and Truncated Dodecahedron
(Beograd:University of Belgrade, Faculty of Mechanical Engineering, 2017)
The paper analyzes the possibility of obtaining polyhedral shapes formed by combining polyhedral surfaces based on the segment surface of elongated concave pyramids of the second sort (CeP II-10, type A and type B). In ...
The Impact of the Daily Temperatures Variation on Dynamic Parameters of Thermal Envelope / Uticaj perioda dnevnih varijacija temperatura na dinamičke parametre termičkog omotača zgrade
(Univerzitet Crne Gore, Građevinski fakultet, Podgorica, 2016)
Flow structure in a compound channel: benchmarking 2D and 3D numerical models
(Queen’s University, Canada, 2022)
The benchmarking test of 2D and 3D numerical models on a compound channel flow with a rectangular-shaped main channel and a rectangular-shaped floodplain was carried out by the IAHR Working Group on Compound Channels. The ...
Merenje protoka vode u tunelima pri kombinovanim uslovima tečenja: primer tunela Dabarsko Polje - Fatničko polje
(Srpsko društvo za hidraulička istraživanja i Srpsko društvo za hidrologiju, 2018)
U opštem slučaju, metode za merenje protoka vode se mogu klasifikovati prema uslovima tečenja na mernom mestu, pa se tako određene metode koriste u sistemima pod pritiskom dok nešto drugačije u sistemima gde se javlja ...
Contribution of strain-hardening cementitious composites (SHCC) to shear resistance in hybrid reinforced concrete beams
(Faculty of Civil Engineering, University of BelgradeSociety for Materials and Structures Testing of SerbiaAssociation of Structural Engineers of Serbia, 2023)
Strain Hardening Cementitious Composite (SHCC) is an innovative type of fibrereinforced
cement-based composite that has superior tensile properties. Because
of this, it holds the potential to enhance the shear capacity ...
Mogućnosti primene DeNSE metode za sektorizaciju distributivnih mreža za redukciju gubitaka
(Savez inženjera i tehničara Srbije, 2023)
Sektorizacija odnosno podela vodovodne mreže na osnovne zone bilansiranja (eng. District Meter Areas – DMAs) predstavlja najisplativiju i opšte prihvaćenu strategiju za kontrolu vodnog bilansa, pritisaka i smanjenje gubitaka ...
Energy, ecological and economic aspects of improvement of the dwelling housing in Belgrade
(Beograd : Arhitektonski fakultet, 2010)
The main concern of this research is building refurbishment. Different possibilities of energy performances improvement of existing dwelling housing in the settlement Konjarnik, Belgrade, Serbia, are estimated from energy ...