Претраживање
Приказ резултата 61-70 од 107
Design and optimisation of laser scanning for tunnels geometry inspection
(Tunnelling and Underground Space Technology, 2013)
The use of terrestrial laser scanning technology in engineering surveys is gaining an increasing interest due to the very high spatial density of the acquired data. Recent improvements regarding the speed, accuracy, software ...
Transparent PMMA/silica nanocomposites containing silica nanoparticles coating under supercritical conditions
(Progress in Organic Coatings, 2013)
This work reports the preparation of PMMA/silica nanocomposites with high optical transparency and enhanced mechanical properties using a melt compounding method. The surface of SiO2 particles was modified with a ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
New approach: waste materials as sorbents for arsenic removal from water
(Publication Cover Journal of Environmental Engineering, 2010)
The sorption of inorganic arsenic species arsenite and arsenate from aqueous solutions onto steel-mill waste and waste filter sand, under neutral conditions, was investigated in this study. Additionally, the steel-mill ...
Management of bridges with shallow foundations exposed to local scour
(CRC Press/Balkema, 2016)
The Serbian road network includes the large portion of bridges with shallow foundations that are vulnerable to local scour as tragically demonstrated during the extreme flooding in May 2014. In order to enhance preparedness ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
Thermoinelasticity of Damaged Elastomers by Self-consistent Method
(International Journal of Damage Mechanics, 2008)
This study deals with an elastomer body having a random 3D distribution of two types of inclusions: spheroidal mutually parallel voids and differently oriented reinforcing parallel elastomeric stiff spheroidal short fibers. ...
An improved analysis of free torsional vibration of axially loaded thin-walled beams with point-symmetric open cross-section
(Elsevier Inc., 2016)
The objective of the paper is to analyze the influence of bimoment induced by constant axial loads on the free motion of thin-walled beams with point-symmetric open cross-section. For various boundary conditions, a closed-form ...
Bounding surface model for overconsolidated clays with new state parameter formulation of hardening rule
(Elsevier Ltd, 2017)
The paper presents a critical state bounding surface constitutive model for describing the behaviour of overconsolidated clays for a wide range of overconsolidation ratios, called the Hardening State Parameter - HASP model. ...
Boundary element-dual reciprocity formulation for bound electron states in semiconductor quantum wires
(Computer Physics Communications, 2008)
Using the boundary element dual reciprocity method-multi-domain (DRM-MD) a bound electron states and corresponding wave functions in semiconductor quantum wires embedded in a matrix were considered. The single circular and ...