Претраживање
Приказ резултата 11-20 од 597
Absolute Time Series GNSS Point Positioning-Data Cleaning and Noise Characterization
(Strojarski fakultet u Slavonskom Brodu, 2020)
Time series data of GNSS point positioning are considerably used for the purpose of geophysical research. The velocity estimates and their uncertainties derive from time series data of GNSS point positioning affected by ...
Building a Construction Project Key-Phrase Network from Unstructured Text Documents
(American Society of Civil Engineers (ASCE), 2017)
During a construction project lifecycle, an extensive corpus of unstructured or semistructured text documents is generated. The nature of unstructured sources impedes users' acquisition, analysis, and reuse of relevant ...
Integration of Materials Science-based Performance Models into PMS
(Wiley Blackwell, 2016)
The integration of materials science-based performance models obtained from laboratory performance testing and modeling into the lifecycle assessment of road pavements is a futureoriented approach for the improvement of ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
FE validation of the equivalent diameter calculation model for grouped headed studs
(Techno Press, 2018)
Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, ...
Triangular proportional scheme and concept of the two serbian medieval churches
(Springer Verlag, 2019)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
An efficient beam-column element for inelastic 3D frame analysis
(Springer Netherland, 2013)
Beam-column elements with section resultant plasticity for the hysteretic behavior of the end plastic hinges are widely used for numerical simulations in earthquake engineering practice because of the good compromise between ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...