Претраживање
Приказ резултата 1-10 од 62
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Effect of Aging on the Rheological Properties of Blends of Virgin and Rejuvenated RA Binders
(RILEM International Symposium on Bituminous Materials, 2020)
The use of rejuvenators has seen a consistent increase over the years in the asphalt pavement industry. This is due to the need for maximizing the demand for incorporating a higher amount of Reclaimed ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
Comfort and elegance in auto design
(Serbian Society for Geometry and Graphics, University of Belgrade - Faculty of Mechanical Engineering, 2020)
Today, we are witnessing a strong combination between industry and art. It can even be argued that authentic artistic industry is being created, which consists of the manufacturing of products that combine useful qualities ...
APPLICATION OF PBL MODEL ON STUDY PROGRAM OF GEODESY AT THE FACULTY OF ARCHITECTURE, CIVIL ENGINEERING AND GEODESY AT THE UNIVERSITY OF BANJALUKA
(Arhitektonsko-Gradjevinsko-Geodetski fakultet Unverziteta u Banjojluci, 2020)
The subject of this paper is the application of the PBL model in the teaching process of the first cycle of studies at the Faculty of Architecture, Civil Engineering and Geodesy. The meaning of the term PBL model and its ...
A Review of Tools for Project Financial Assessments
(Elsevier, 2020)
Governments not always have the funds to build transport and other infrastructure projects that are economically justified and environmentally and socially sound. Under certain circumstances, projects meeting such conditions ...