Претраживање
Приказ резултата 1-10 од 14
Comprehensive review of the structural behaviour and numerical modelling of recycled aggregate concrete-filled steel tubes
(Elsevier, 2024)
This paper summarises current research findings related to the behaviour and simulation of a relatively new type
of structural component: recycled aggregate concrete-filled steel tube columns (RACFST). The first part of ...
An efficient model for 3D analysis of steel frames exposed to fire
(Elsevier, 2024)
The paper presents a nonlinear concentrated plasticity frame element for advanced analysis of steel frames exposed to elevated temperatures. The element extends the formulation based on the generalized plasticity material ...
Effect of rib-to-beam angle on the shear resistance of headed studs in composite slab
(Elsevier, 2024)
Headed stud shear connectors are commonly implemented in steel-concrete composite floors for connecting the concrete slab to the steel beam and providing composite action between those two elements. The orientation of ...
A compliance assessment of GNSS station networks in Serbia
(Geographical Institute “Jovan Cvijić” of the Serbian Academy of Sciences and Arts (SASA), 9 Djure Jakšića St., Belgrade 11000, Serbia, 2024)
Since the early 21st century, Global Positioning System (GPS) technology has dominated geodetic reference networks. Almost all countries established a permanent Global Navigation Satellite System (GNSS) station network to ...
Simplified methodology for fatigue analysis of reinforced asphalt systems
(Springer, 2024)
Fatigue analysis has an important role in evaluating the durability and performance of asphalt pavements, especially when novel or alternative materials are used. Numerous laboratory studies have investigated fatigue ...
Improving performance of bucket-type hydrological models in high latitudes with multi-model combination methods: Can we wring water from a stone?
(Elsevier, 2024)
Multi-model combination (averaging) methods (MMCMs) are used to improve the accuracy of hydrological (precipitation-runoff) outputs in simulation or forecasting/prediction modes. In this paper, we examined if the application ...
Towards Quality Management Procedures in 3D Cadastre
(MDPI, 2024)
The 3D cadastre presents a modern approach to the development of cadastral information systems, with the role of improving current cadastral systems and overcoming the challenges of a 2D-based approach. Technological ...
Influence of Monolith Length on Temperature Field of Concrete Gravity Dams
(MDPI, 2024)
This paper examines the influence of monolith length on the temperature field of concrete gravity dams built using the block method. The developed 3D model is capable of conducting a thermal analysis of a 95.0 m high ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
Kriterijumi za primenu hibridnog modela 3D katastra u Srbiji
(Savez inženjera i tehničara Srbije, 2024)
3D katastar kao savremeni pristup razvoju katastarskog informacionog sistema donosi mnoge prednosti i rešava poteškoće koje ima sadašnji katastarski sistem kada je reč o upisu i vizualizaciji 3D kompleksnih situacija. ...