Претраживање
Приказ резултата 1-10 од 573
Important glued laminated timber constructions built in Serbia / Značajni objekti od lepljenog lameliranog drveta izvedeni u Srbiji
(Savez građevinskih inženjera Srbije, Beograd, 2014)
Glued laminated timber has been increasingly used as a building material in Serbia over the last ten years. In the former state of SFRJ, there were three factories of glued laminated structures, in Croatia, Slovenia and ...
Energy efficiency of buildings in Serbia: State-of-the-art and perspectives / Energetska efikasnost zgrada u Srbiji - stanje i perspektive
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd, 2010)
In the present paper, state of the art of Energy Efficiency of buildings (residential, business, industrial) in Serbia is given. Special attention will be paid to energy efficiency of already existing or new buildings. ...
Ispitivanje reoloških karakteristika bitumena Zero shear viscosity
(Put i saobraćaj, 2017)
Geometric deformation analysis in free geodetic networks: case study for Fruska Gora in Serbia
(Academy of Sciences of the Czech Republic,, 2017)
The deformation measurements are performed for the purpose of obtaining information concerning ground movement and objects on the ground within given time intervals. For the purpose of improving conventional models of ...
Seismic design of masonry structures based on Eurocode 8 / Seizmički proračun zidanih zgrada prema Evrokodu 8
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2013)
Seismic design of masonry buildings is a very common task of civil engineers in their daily practice. It is very important for structures in seismic areas bearing in mind that the brick buildings typically have a much lower ...
Improvement of toughness and impact resistance of concrete by fiber reinforcement / Povećanje žilavosti i udarne otpornosti betona putem mikro-armiranja
(Savez građevinskih inženjera Srbije, Beograd, 2010)
The paper deals with actual methodology and relevant technical regulation in the field of toughness (i.e. ductility) testing of fiber-reinforced concrete subjected to static load (flexural or wedge-splitting test), as well ...
UIC recommendations for design of railway bridges / UIC preporuke za projektovanje železničkih mostova
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2017)
This paper discusses the basic principles of interaction track/bridge. Influences of different bridge structures on the bridge expansion length were analyzed in order to avoid expansion joints in CWR track. Influences of ...
Forming a Regular Pentagon, Decagon and Pentagram Using Origami Technique
(Belgrade: Mathematical Institute SASA, 2010)
Forming a regular pentagon, decagon and pentagram using origami technique is based on the construction of approximately 36oangle by dint of A4 paper of format. The implemented method is “fold and cut”. ...
Validation of hydro-environmental data / Validacija podataka hidrotehničkih procesa
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2010)
The knowledge about hydraulic and hydrologic processes is based on the monitoring of environmental and technical systems where they take place. The result of monitoring are the data that can be transformed into some useful ...
One example of creating flood risk maps in Serbia / Jedan primer kartiranja rizika od poplava u Srbiji
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2014)
This paper deals with problems of creating flood risk maps, considering methodology and problems of its implementation in practice. A case study, pertaining to production of flood hazard and flood risk maps for municipality ...