Претраживање
Приказ резултата 1-10 од 254
Track alignment parameters on modern railway lines for mixed traffic
(Faculty of Mechanical Engineering, Niš, 2018)
Critical state constitutive model for overconsolidated clays - HASP model
(Proceedings of the 16th Danube - European Conference on Geotechnical Engineering, 2018)
The paper presents a simple critical state bounding surface constitutive model for describing the
mechanical behaviour of overconsolidated clays. Keeping the simplicity and the same set of the parameters as Modified Cam ...
Experimental investigation of scour and pressures on a single span arch bridge under inundation
(Utah State University, 2018)
This paper presents two experiments, carried out in a 605mm-wide flume, to investigate scour and hydrodynamic pressure on a scaled model of a single span arch bridge. The geometry of the bridge model is scaled down according ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
FE validation of the equivalent diameter calculation model for grouped headed studs
(Techno Press, 2018)
Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Modelling of shear strength of rockfills used for the construction of rockfill dams
(Elsevier B.V., 2018)
This paper presents the results of examination of shear properties of rockfills used for the construction of rockfill dams. Based on the results of a large number of experiments, mathematical model of the shear strength ...
Strength of composite flysch samples under uniaxial compression
(Springer Verlag, 2018)
This paper presents the results of uniaxial compression strength tests performed on samples composed of sandstone and siltstone discs. Samples are loaded until failure, with the aim of determining the dependency between ...
ODŠTETNI ZAHTEVI NA GRAĐEVINSKIM PROJEKTIMA – KVANTIFIKACIJA I PREVENCIJA / CLAIMS ON CONSTRUCTION PROJECTS – QUANTIFICATION AND PREVENTION
(Contemporary Construction Practice 2018, 2018)
Odštetni zahtevi predstavljaju veoma značajnu temu zato što njihova novčana vrednost može biti vrlo velika dok kvantifikacija nije egzaktna i kreće se u praksi u rasponu 1:3 u zavisnosti od primenjenih metoda koje su redom ...