Претраживање
Приказ резултата 1-10 од 191
Furthering knowledge on the flow pattern around high-rise buildings: LES investigation of the wind energy potential
(Elsevier, 2022)
To understand the favourable locations for maximum yield of urban wind energy, understanding the flow pattern on the roof region of high-rise buildings is crucial. However, very few studies in the literature report on the ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Estimation of vertical accuracy of digital terrain model FABDEM on the territory of the republic of Serbia
(SGEM, 51 Alexander Malinov blvd, Sofia, 1712, Bulgaria, 2022)
In 2004, a digital terrain model (DTM) was created in Serbia. It was obtained by vectorizing isohypses on topographic maps with a scale of 1: 25000. The resolution of the digital model of Serbia is 30 m, and the vertical ...
Практикум - Геодетски премер 2
(Грађевински факултет, Универзитет у Београду, 2022)
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Recommendation of RILEM TC 264 RAP on the evaluation of asphalt recycling agents for hot mix asphalt
(Springer, 2022)
This recommendation is based on the results of an inter-laboratory study organised by the RILEM technical committee TC 264-RAP "Asphalt Pavement Recycling"—Task Group 3 (TG3) focusing on Asphalt Binder for Recycled Asphalt ...
Intuitionistic Propositional Probability Logic
(Mathematical Logic Quarterly, 2022)
We give sound and complete axiomatization of a probabilistic extension of intuitionistic logic. Reasoning with probability operators, unlike other works on this topic, is also intuitionistic, that is, measure functions ...