Претраживање
Приказ резултата 1-10 од 24
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Estimating residual value of heavy construction equipment using ensemble learning
(http://cedb.asce.org, 2021)
Knowing the right moment for the sale of used heavy construction equipment is important information for every construction company. The proposed methodology uses ensemble machine learning techniques to estimate the price ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Short-term forecasting of PM10and PM2.5 concentrations with Facebook's Prophet Model at the Belgrade-Zeleno brdo
(Geofizika, 2023)
We demonstrate the use of Facebook's Prophet (usually just called Prophet) model for short-term air quality forecasting at Belgrade-Zeleno brdo monitoring station. To address missing data, we applied ...
On F-Contractions: A survey
(Universal Wiser Publisher, 2022)
D. Wardowski proved in 2012 a generalization of Banach
Contraction Principle by introducing F-contractions in metric spaces.
In the next ten years, a great number of researchers used Wardowski's
approach, or some of its ...
SSIMS-Flow: Image velocimetry workbench for open-channel flow rate estimation
(Elsevier, 2023)
Image-based hydrological measurement techniques have surged in popularity over the last decade, with the most common type of data obtained being the open-channel surface velocity field and flow rate. The lack of a feature-rich ...
Prediction model for calculation of the limestone powder concrete carbonation depth
(Elsevier Ltd, 2024)
The efficient way to mitigate the impact of the concrete industry on climate change is to reduce the clinker content in the concrete mix. Beside incorporating supplementary cementitious materials (SCMs), it is possible to ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...