Претраживање
Приказ резултата 1-10 од 20
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Application of geophysical and multispectral imagery data for predictive mapping of a complex geo‑tectonic unit: a case study of the East Vardar Ophiolite Zone, North‑Macedonia
(Springer-Verlag GmbH Germany, 2024)
The Random Forest (RF) and K nearest neighbors (KNN) machine learning (ML) algorithms were evaluated for their ability to predict ophiolite occurrences, in the East Vardar Zone (EVZ) of central North Macedonia. A predictive ...
Effect of rib-to-beam angle on the shear resistance of headed studs in composite slab
(Elsevier, 2024)
Headed stud shear connectors are commonly implemented in steel-concrete composite floors for connecting the concrete slab to the steel beam and providing composite action between those two elements. The orientation of ...
SSIMS-Flow: Image velocimetry workbench for open-channel flow rate estimation
(Elsevier, 2023)
Image-based hydrological measurement techniques have surged in popularity over the last decade, with the most common type of data obtained being the open-channel surface velocity field and flow rate. The lack of a feature-rich ...
Prediction model for calculation of the limestone powder concrete carbonation depth
(Elsevier Ltd, 2024)
The efficient way to mitigate the impact of the concrete industry on climate change is to reduce the clinker content in the concrete mix. Beside incorporating supplementary cementitious materials (SCMs), it is possible to ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...