Претраживање
Приказ резултата 31-36 од 36
Creep and shrinkage of concrete according to Eurocode 2 / Deformacije tečenja i skupljanja betona prema Evrokodu 2
(Savez inženjera i tehničara Srbije, Beograd, 2017)
This paper presents the procedure for calculation of creep coefficient and shrinkage strain according to Eurocode 2 (SRPS EN 1992-1-1:2004). The calculated values of final creep coefficient and shrinkage strain, for the ...
Possibilities of Using Sulfur for Concrete Production and its Application
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2015)
Two types of concrete will be shown in this paper. First type of concrete is sulfur concrete, where part of Portland cement was replaced with sulfur. Second type of concrete is selfcompacting concrete, where sulfur replaced ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Determination of pH in Powdered Concrete Samples or in Suspension
(Basel : MDPI, 2019)
Concrete is a material that is widely used by mankind. Although different deterioration mechanisms can lead to degradation of the concrete itself, reinforcement corrosion is the biggest durability issue for reinforced ...
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...