Pretraživanje
Prikaz rezultata 1-10 od 18
Rail defects head checking on the Serbian railways
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2014)
The rail defects due to rolling contact fatigue represent serious safety hazard for rail traffic all around the world. That hazard is more distinct on railways without adequate maintenance strategy, with the increase of ...
Railway bridges on interoperable lines: Aspect of track/bridge interaction / Železnički mostovi na interoperabilnim prugama - aspekt interakcije kolosek/most
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2018)
The Institute for Standardization of Serbia has adopted a large number of en standards in the field of bridges as Serbian standards. Unfortunately, technical regulations based on the implementation of the adopted en standards ...
Interoperability of Railway Infrastructure in the Republic of Serbia
(Springer, Cham, 2019)
The competitiveness of the railway transport is still limited by the
differences in terms of infrastructure, rolling stock, transport technology,
maintenance strategy, signaling systems, electrification systems, safety ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Critical analysis of RCF rail defects classification
(Elsevier B.V., 2022)
The paper presents a brief review of the rail defect coding systems, which were recommended by the International Union of Railways during the period from 1959 to today. The recommended classification and numbering of RCF ...
Temperature Stresses in CWR – Experience of Serbian Railways
(Springer, Cham, 2020)
The railway track with continuously welded rails is an essential part of
the modern railway superstructure around the world. Calculation of the temperature
stresses in continuously welded rails has great significance for ...
Wheel/rail noise control / Kontrola buke u dodiru točka i šine
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2011)
This paper analyzes the relation between wheel and rail induced noise regarding the reduction in the total noise emission. Priorities are defined for reduction of noise emission from wheel and rail. It is also pointed out ...
Harmonization of track alignment design parameters / Harmonizacija parametara trase železničke pruge
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2014)
This paper presents a process of harmonization of technical regulations in the Railway applications field in the Republic of Serbia. The content of standard SRPS EN 13803-1:2010 Railway applications - Track - Track alignment ...
Contribution to the dimensioning of tracks on asphalt roadbed / Prilog dimenzionisanju koloseka na asfaltnoj podlozi
(Univerzitet u Nišu - Građevinsko-arhitektonski fakultet, Niš, 2004)
The Paper defines the technical requirements for the individual elements of the permanent way and the roadbed of the track on asphalt. Apart from this, a procedure for dimensioning of this structure on the multilayered ...
Test methods and requirements for fastening systems for concrete sleepers / Metode ispitivanja i tehnički uslovi za sisteme šinskih pričvršćenja za betonske pragove
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2017)
In order to realize interoperability of railway system, the reconstruction and modernization plan of railway network in the Republic of Serbia should be harmonized with technical requirements of European railway network. ...