Претраживање
Приказ резултата 1-10 од 166
The application of a multi-parameter analysis in choosing the location of a new solid waste landfill in Serbia
(Waste Management & Research, 2013)
This article presents a process of evaluation and selection of the most favourable location for a sanitary landfill facility from three alternative locations, by applying a multi-criteria decision-making (MCDM) method. An ...
Dynamic Soil-Structure Analysis of Tower-Like Structures Using Spectral Elements
(Tehnički vjesnik, 2018)
In this paper general equation system for linear dynamic soil-structure interaction (SSI) in frequency domain is presented. The main objective of the paper is to provide and investigate a possibility to use spectral elements ...
Identification of movements using different geodetic methods of deformation analysis
(Geodetski vestnik, 2015)
This paper is based on comparative analysis of applied analysis methods on geodetic networks deformation, based on two-dimensional components of GNSS baseline vectors simulated by two epochs, for the purpose of identifying ...
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kauno Technologijos Universitetas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Problems of the design and construction of slab between floors
(Tehnički vjesnik, 2014)
This paper gives a brief overview of building floor slabs starting from slabs with wooden beams to the present reinforced concrete (panels AB). The authors in this paper analyze some new logical views on the issue of ...
Geometric deformation analysis in free geodetic networks: case study for Fruska Gora in Serbia
(Academy of Sciences of the Czech Republic,, 2017)
The deformation measurements are performed for the purpose of obtaining information concerning ground movement and objects on the ground within given time intervals. For the purpose of improving conventional models of ...
Terrain correction computations using digital density model of topographic masses
(Zvava Geodetov Slovenije, 2018)
This paper presents the determination of terrain correction by the means of the Digital Density Model (DDM) of topographic masses (Earth's crust mass above the geoid) for the territory of Serbia. The DDM is determined using ...
Fly ash and slag utilization for the Serbian railway substructure
(Vilnius Gediminas Technical University, 2016)
Approximately 7 million tons of fly ash and slag are produced in thermal power plants in Serbia every year, only 3% of which is used in the cement industry. About 300 million tons of the ash-slag mixture are disposed in ...
Specific features of stainless steel compression elements
(Union of Croatian Civil Engineers and Technicians, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...
Generalized arago-fresnel laws: the eme-flow-line description
(Journal of Russian Laser Research, 2010)
We study experimentally and theoretically the influence of light polarization on the interference patterns behind a diffracting grating. Different states of polarization and configurations are considered. The experiments ...