Претраживање
Приказ резултата 21-27 од 27
A database on flexural and shear strength of reinforced recycled aggregate concrete beams and comparison to Eurocode 2 predictions
(Construction and Building Materials, 2016)
A comprehensive database of recycled aggregate concrete and companion natural aggregate concrete beams’ flexural and shear strength was compiled from 217 experimental results. Strict criteria were applied to determine the ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Environmental assessment of green concretes for structural use
(Journal of Cleaner Production, 2017)
This paper presents a comparative environmental assessment of several different green concrete mixes
for structural use. Four green concrete mixes were compared with a conventional concrete mix: recycled
aggregate concrete ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...
Prediction model for calculation of the limestone powder concrete carbonation depth
(Elsevier Ltd, 2024)
The efficient way to mitigate the impact of the concrete industry on climate change is to reduce the clinker content in the concrete mix. Beside incorporating supplementary cementitious materials (SCMs), it is possible to ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...