Претраживање
Приказ резултата 11-20 од 79
Numerical modelling of end-notched glulam beams reinforced with GFRP bars
(Centro UC de Innovacion en Madera, 2021)
Load carrying capacity of end-notched timber beams can be significantly decreased depending on the geometry of notches. Concentration of tensile stresses perpendicular to grain and shear stresses at the notch corner can ...
Vibrational serviceability design method for timber floors according to Eurocode 5
(MASE - Macedonian Association of Structural Engineers, 2022)
Human-induced vibrations of timber floors are considered to be a serviceability issue that primarily
relates to discomfort of occupants. These vibrations are particularly problematic because they happen frequently and ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
Influence of Cracks on the Carbonation Resistance of Recycled Aggregate Concrete
(Fib, 2021)
The use of recycled concrete aggregate (RCA) for the production of new concrete can be a promising eco-efficient solution. However, replacement of natural aggregate (NA) with RCA influences concrete’s durability performance. ...
Steel Structure Prediction Model for Fixed Roof Oil Tanks
(Wiley / Ernst & Sohn GmbH, 2021)
This paper will focus on fixed roof storage tanks and its sub-category cone roof tanks. Paper presents major factors and outputs of tank design process. Theoretical analysis is done for a cone roof tank model and correlation ...
Influence of coarse recycled concrete aggregate on the durability of asphalt mixtures
(RILEM International Conference on Sustainable Materials, Systems and Structures (SMSS 2019) New Generation of Construction Materials, 2019)
Until recently, coarse recycled concrete aggregate (RCA) has been used for the production of new concrete and soil stabilization, as well as for materials applied in road pavement construction, primarily for unbound base ...
Deflections of reinforced concrete beams made with recycled and waste materials under sustained load: Experiment and fib Model Code 2010 predictions
(CRC Press, London, 2018)
This paper presents experimental results of long-term behavior of reinforced beams made from natural aggregate concrete (NAC), recycled aggregate concrete (RAC), and high-volume fly ash concrete (HVFAC) under sustained ...
Design and construction of DELTA CITY shopping mall concrete structure in Belgrade
(CRC Press/Balkema, 2008)
The structure of DELTA CITY shopping mall in Belgrade consists oftwo separated structures: the structure of the mall and the structure of the multi-story open garage. The overall dimensions of the irregular layout of the ...
Thick Resistive Film Application on Steel Bars for Structural Health Monitoring
(Electron Devices Society of the Institute of electrical and electronics engineers, inc., 2023)
This paper aims to examine the applicability of thick-film piezo-resistive sensors on steel bars for the structural health monitoring purposes. A thick film ceramic piezo-resistive sensor was manufactured and used to ...
Design aspects of Eurocode 2 methods for deflection control
(Czech Concrete Society, 2011)
Paper deals with problems arising from application of the EN 1992-1-1:2004 deflection control clauses. Remarks are addressed both to the instructions for a rigorous method and to the simplified procedure for an indirect ...