Pretraživanje
Prikaz rezultata 1-10 od 48
High strength concrete influence of component materials on created structure and physical-mechanical properties
(IRMA Inštitut za raziskavo materialov in aplikacije, Ljubljana, 2015)
Glulam beams reinforced with internally positioned CFRP plates
(MASE - Macedonian Association of Structural Engineers, Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
In recent years the use of fiber reinforced polymer (FRP) composites for strengthening and repairing structural members has significantly increased. This paper presents an experimental study carried out in order to investigate ...
Design recommendations of floor vibrations induced by human activities
(Macedonian Association of Structural Engineers, Skopje, 2015)
Structural engineers are now facing with new demands towards long spans, lightweight floors in steelconcrete composite construction and big open interiors. Thеsе new design trends аrе leading to the extensive problems ...
Overview of Sustainable Cementitious Composites Properties with Added Recycled Rubber
(Applied Mechanics and Materials, 2015)
The paper is focused to the properties of cementitious composites such as: mortar, ordinary concrete and self-compacting concrete made by means of recycled rubber granulate as a partial replacement for commonly used ...
Numerical modeling of supercritical flow in closed conduit bend / Numeričko modeliranje burnog tečenja u krivini zatvorenog provodnika
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2015)
Numerical modeling of supercritical flow in closed conduit bend is a continuation of the scale model experiments. The main goal of application of numerical model is to extend the range of investigation and to simulate ...
Application of semi-Markov decision process in bridge management
(International Association for Bridge and Structural Engineering (IABSE), 2015)
The state-of-the-art Bridge Management Systems (BMSs) feature tightly coupled deterioration and preservation optimization model that enable determining the most cost-effective maintenance strategies at both the project and ...
Teorijsko i eksperimentalno istraživanje gubitaka sile prednaprezanja u visokovrednim zavrtnjevima / Theoretical and experimental research of losses of pretension force in high strength bolts
(Универзитет у Београду, Грађевински факултет, 2015)
Tarni spojevi sa prednapregnutim zavrtnjevima imaju veliki značaj u oblastičeličnih konstrukcija, posebno u slučajevima konstrukcija izloženenih dejstvudinamičkog opterećenja, kao što su mostovi, kranski nosači, stubovi ...
Methods of damage detection of structures based on changes of dynamic characteristics / Metode detekcije oštećenja konstrukcija na osnovu promene dinamičkih karakteristika
(Savez građevinskih inženjera Srbije, Beograd, 2015)
The paper presents overview of damage detection of structures using non destructive test methods and corresponding optimization procedures for detection, localization and severity of damage. Change of a stiffness, as a ...
Bending behaviour of glulam beams reinforced with carbon FRP plates
(Taylor and Francis Ltd., 2015)
The idea of reinforcing glued laminated timber (glulam) beams came in response to the need to improve the mechanical properties, as well as to ensure higher reliability of this type of structural elements. This paper ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...