Претраживање
Приказ резултата 31-40 од 79
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
Adriseismic Methodology for Expeditious Seismic Assessment of Unreinforced Masonry Buildings
(Buildings, 2023)
The paper describes a novel Adriseismic method for exp4editious assessment of seismic risk associated with unreinforced masonry buildings. The methodology was developed for the Adriseismic project of the Interreg ADRION ...
Numerički postupak za određivanje stanja deformacija i napona u AB presecima
(Društvo građevinskih konstruktera Srbije, 2022)
U radu je dat predlog jednog numeričkog postupka za određivanje stanja deformacija i napona u armiranobetonskim presecima. Postupak se zasniva na MKE sa korišćenjem “fiber“ elemenata. Za predložene veze napona i deformacija ...
Landslide stabilization in cut zone number 6 from km 28 + 478,00 to km 28 + 643,00
(8th International conference ''Contemporary achievements in civil engineering'', 22-23. April 2021. Subotica, 2021)
In the cut zone number 6 on E-80 Niš-Dimitrovgrad highway from km 28 +
478,00 to km 28 + 643,00 slope stability was affected causing mass movement. Additional
inclinometers measured the mass wasting thickness between 14 ...
Augmented state estimation of urban settings using intrusive sequential Data Assimilation
(arXiv preprint arXiv:2301.11195, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed combining heterogeneous experimental samples and RANS CFD. The coupling is performed using techniques based on the Ensemble Kalman Filter ...
Influence of stiffener and flange on elastic critical load of i-girders subjected to patch loading
(MASE Macedonian Association of Structural Engineering, 2022)
The paper considers the influence of patch load length, flange thickness, and stiffener's characteristics
on the behaviour of steel plate girders subjected to patch loading in terms of elastic stability. The aim is
to ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Elastic critical load of longitudinally unstiffened I-girders subjected to patch loading
(Association of Structural Engineers of Serbia, 2022)
The paper considers the elastic critical load of longitudinally unstiffened I-girders subjected to a localized load of variable length in the plane of the web. In the current regulations, the contribution of the patch ...