Претраживање
Приказ резултата 1-10 од 46
Evaluation of methods for predicting axial capacity of jacked-in and driven piles in cohesive soils
(Union of Croatian Civil Engineers and Technicians, 2018)
This paper presents the evaluation of methods for predicting the ultimate axial bearing capacity of single piles based on the cone penetration test (CPT) results, and the evaluation of static methods based on the effective ...
Instance-based transfer learning for soil organic carbon estimation
(Frontiers in Environmental Science, 2022)
Soil organic carbon (SOC) is a vital component for sustainable agricultural
production. This research investigates the transfer learning-based neural
network model to improve classical machine learning estimation of ...
Sustainable Railway Infrastructure and Specific Environmental Issues in the Republic of Serbia
(Strojarski Facultet, 2018)
Transport represents both need and threat to the modern human society. European transport policy aims at sustainable transport development based on the efficient use of natural resources, protection and improvement of ...
Landslide susceptibility assessment using SVM machine learning algorithm
(Engineering Geology, 2011)
This paper introduces the current machine learning approach to solving spatial modeling problems in the domain of landslide susceptibility assessment. The latter is introduced as a classification problem, having multiple ...
Use of finite element method for 2D and 3D analyses of tunnelling induced settlements
(Croatian Association of Civil Engineers, 2020)
Results of a series of 3D and 2D analyses of open-face tunnelling in marly-clayey deposits are presented in the paper. A parametric study was performed to investigate the influence of initial stress state, soil deformability, ...
Application of Hardening State Parameter Constitutive Model for Prediction of Overconsolidated Soft Clay Behavior Due to Embankment Loading
(MDPI / Applied Sciences, 2023)
This paper investigates the possibility of the application of the HArdening State Parameter (HASP) constitutive model for numerical modelling of overconsolidated soft clay under embankment loading. The HASP constitutive ...
3D analysis of tunnel lining - rock mass interaction, I: Numerical modelling / 3D analiza interakcije tunelske obloge i stenske mase, I - numeričko modeliranje
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2004)
In the analysis of tunnel lining - rock mass interaction, it is essential to consider partial stress release at the tunnel face, i.e. deformation of the tunnel walling that occurs before the application of the lining. ...
Determination of Mohr-Coulomb Parameters for Modelling of Concrete
(Crystals / MDPI, 2020)
Cohesion is defined as the shear strength of material when compressive stress is zero. This article presents a new method for the experimental determination of cohesion at pre-set angles of shear deformation. Specially ...
The measurement of inclination on gravity concrete dams using the tiltmeter instrument / Merenje nagiba kod gravitacionih betonskih brana primenom instrumenta tiltmetar
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The measurement of inclination on gravity concrete dams using the instrument tiltmeter is described and discussed with special reference on obtained results on the dam 'Đerdap 2' acquired in the three years period. Tiltmetar ...
Special-purpose river-port sediment valorization as road construction material emphasizing environmental aspects
(Romanian Journal of Transport Infrastructure, 2020)
Special-purpose river port sediment was investigated for its potential use as a road
construction material. Sediment samples were extracted from three locations in three small
river ports, and detailed laboratory research ...