Search
Now showing items 21-30 of 42
Comparative analysis of diagonal tension design toward EC2 and PBAB-87 / Uporedna analiza proračuna kosih glavnih napona prema EC2 i PBAB-87
(Savez građevinskih inženjera Srbije, Beograd, 2009)
Design proceedings of reinforced concrete in accordance with EN 1992-1-1:2004 Eurocode 2 and with current Serbian regulations PBAB-87 are given. The difference in design and results between members not requiring design ...
Copper Slag of Pyroxene Composition as a Partial Replacement of Natural Aggregate for Concrete Production
(MDPI, 2021)
Copper slag, a by-product of the pyrometallurgical process used for obtaining copper from
copper ore in Bor, Serbia, contains mainly silicon, iron, calcium, and aluminium oxides. Due to
such properties, it is disposed ...
Resistance of concrete to carbonation and chloride ingress: testing results and service life prediction
(IRMA, 2018)
Reinforcement corrosion due to carbonation and chloride ingress is one of the main deterioration mechanisms of reinforced concrete structures. There is a special concern about concrete structures with a very long demanded ...
Modeling of properties of fiber reinforced cement composites / Modeliranje svojstava mikroarmiranih cementnih kompozita
(Univerzitet u Nišu, Niš, 2008)
This paper presents the results of authors' laboratory testing of the influence of steel fibers as fiber reinforcement on the change of properties of cement composite mortar and concrete type materials. Mixtures adopted - ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Design aspects of Eurocode 2 methods for deflection control
(Czech Concrete Society, 2011)
Paper deals with problems arising from application of the EN 1992-1-1:2004 deflection control clauses. Remarks are addressed both to the instructions for a rigorous method and to the simplified procedure for an indirect ...
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...
Green Concrete and Mortar Made with Recycled Aggregate – a Step towards Sustainability in Civil Engineering
(IRASA – International Research Academy of Science and Art Belgrade, 2022)
The testing of physical and mechanical properties has always been the starting point for production of adequate cement composites, such as concrete and mortar. The need to preserve the environment by recycling materials, ...
Uticaj zamene cementa krečnjačkim filerom na svojstva betona
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
U radu su prikazana eksperimentalna ispitivanja jedne vrste zelenih betona kod kojih je Portland cement zamenjen sa dve vrste krečnjačkog filera istog porekla i mineraloškog sastava, a različite finoće mliva. Projektovano ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...