Претраживање
Приказ резултата 1-10 од 829
Tehnologija građevinskih radova
(Građevinski fakultet u Beogradu, 2015)
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Estimation of 1D-confluence model parameters in right-angled discordant beds’ confluences using 3D numerical model
(CRC Press/Balkema, 2016)
Parameters of 1D confluence models are originally defined for concordant beds’ (CB’s) confluences. This paper aims at estimating these parameters for discordant beds’ confluences using numerical simulation results of 3D ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
Hydrodynamic effects of debris blockage and scour on masonry bridges: Towards experimental modelling
(CRC Press/Balkema, 2016)
This paper describes the preliminary stage of an ongoing project investigating the hydrodynamic effects of debris blockage at masonry bridges. Debris blockage is cited as one of the primary causes of bridge failures in the ...
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...
On the combined effect of bed elevation discordances in the main-river and the tributary in 90° straight-channel confluences
(CRC Press/Balkema, 2016)
The role of the difference in bed elevations in the main-river (ΔzMR) and the tributary (ΔzT) at their entrance to a 90° straight-channel confluence is studied numerically using a 3D finite-volume model. Three characteristic ...
Object-oriented framework for 3D bending and free vibration analysis of multilayer plates: Application to cross-laminated timber and soft-core sandwich panels
(Elsevier, 2021)
In the paper, the main steps involved in the development of an object-oriented computational framework for the 3D bending and free vibration analysis of multilayer plates are presented. The mathematical formulation for ...
Planning and Suitability Assessment of Large-scale Nature-based Solutions for Flood-risk Reduction
(Water Resources Management, 2021)
Adverse effects of climate change are increasing around the world and the floods are
posing significant challenges for water managers. With climate projections showing
increased risks of storms and extreme precipitation, ...