Претраживање
Приказ резултата 1-10 од 108
Geometric proportional model of the church of the Ljubostinja monastery
(University of Arts in Belgrade Faculty of Applied Arts Kralja Petra 4, Belgrade,Serbia, 2020)
The use of proportions is one of the oldest theoretical issues in architecture. However, sometimes geometry, with its specific shapes and constraints
between them, can fully describe the logic of architectural design. ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...
Radiological and material characterization of high volume fly ash concrete
(Journal of Environmental Radioactivity, 2016)
The main goal of research presented in this paper was the material and radiological characterization of high volume fly ash concrete (HVFAC) in terms of determination of natural radionuclide content and radon emanation and ...
Biomimetic Approach to Parametric Flower Modeling
(Advances in Intelligent Systems and Computing book series (AISC, volume 1296); Conference proceedings ICGG 2020, 2020)
Biodesign means life, living forms, it’s often associated with organic shapes and patterns and it has its wide use in landscape architecture. In the past few decades, there has been a great deal of progress in the study ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
The Successful Delivery of Megaprojects: A Novel Research Method
(SAGE Publications Inc., 2017)
Megaprojects are often associated with poor delivery performance and poor benefits realization. This article provides a method of identifying, in a quantitative and rigorous manner, the characteristics related to project ...
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...
Alkali-activated concrete with Serbian fly ash and its radiological impact
(Elsevier, 2016)
The present paper reports the results of a study on different types of fly ash from Serbian coal burning power plants and their potential use as a binder in alkali-activated concrete (AAC) depending on their radiological ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Numerical simulation of Submarine non-rigid landslide by an explicit three-step incompressible smoothed particle hydrodynamics
(Elsevier, 2021)
Many landslides in nature may be classified as deformable landslides. The landslide volume is usually modeled as a rheological material when SPH methods are used for landslide simulation, since these methods allow for the ...