Претраживање
Приказ резултата 1301-1310 од 1310
Improved Serviceability and Environmental Performance of One-Way Slabs through the Use of Layered Natural and Recycled Aggregate Concrete
(MDPI, 2020)
Recycled aggregate concrete (RAC), i.e., concrete produced with recycled concrete aggregate
(RCA) has been heavily investigated recently, and the structural design of RAC is entering into
design codes. Nonetheless, the ...
ECO2 framework assessment of limestone powder concrete slabs and columns
(Elsevier, 2022)
Producing limestone powder requires comparably far less energy than the production of ordinary
Portland cement (OPC), making it a promising sustainable solution for partial replacement of OPC
in concrete. Lower production ...
Application of Hardening State Parameter Constitutive Model for Prediction of Overconsolidated Soft Clay Behavior Due to Embankment Loading
(MDPI / Applied Sciences, 2023)
This paper investigates the possibility of the application of the HArdening State Parameter (HASP) constitutive model for numerical modelling of overconsolidated soft clay under embankment loading. The HASP constitutive ...
On the initial coefficients for certain class of functions analytic in the unit disc
(Rocky Mountain Mathematics Consortium, 2020)
Axially capacity of the CFT columns / Aksijalna nosivost CFT stubova
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2015)
This paper analyzes the axial load capacity of CFT columns according to the following standards and codes: EC 4, ACI, AS, AISC, AIJ, DL/T. The influence of the confinement concrete core by steel tube, ratio d/t i e/d, ...
Bearing capacity and stability of elastically fixed cft slender columns
(Strojarski Facultet, 2017)
CFT columns are one of the basic structural elements in "top-down" construction method. Because of the large depth of excavation the question of stability of these columns raises. This paper presents a procedure for ...
Calculation of load capacity and stability of moderately slender and slender axial loaded circular CFT columns / Proračun nosivosti i stabilnosti umereno vitkih i vitkih centrično pritisnutih kružnih CFT stubova
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2018)
In this paper, results of experimental investigation of bearing capacity and stability of slender and moderately slender CFT circular tubes are presented. The effects of ratio thickness/ radius of steel cross section and ...
Design of circular composite CFT columns according to Eurocode 4 / Analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2013)
This paper presents a simplified method for calculation of bearing capacity of composite columns according to the European standard for the calculation of composite steel and concrete structures - Eurocode 4. Resistance ...
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...