Претраживање
Приказ резултата 21-30 од 39
Design aspects of Eurocode 2 methods for deflection control
(Czech Concrete Society, 2011)
Paper deals with problems arising from application of the EN 1992-1-1:2004 deflection control clauses. Remarks are addressed both to the instructions for a rigorous method and to the simplified procedure for an indirect ...
Green Concrete and Mortar Made with Recycled Aggregate – a Step towards Sustainability in Civil Engineering
(IRASA – International Research Academy of Science and Art Belgrade, 2022)
The testing of physical and mechanical properties has always been the starting point for production of adequate cement composites, such as concrete and mortar. The need to preserve the environment by recycling materials, ...
Influence of cement replacement with limestone filler on the properties of concrete
(Građevinski materijali i konstrukcije, 2021)
This paper presents an experimental research of one type of green concrete in which Portland cement was replaced with two types of limestone filler of the same origin and mineralogical composition, but with a different ...
Long-term behavior of composite concrete girders made continuous
(MASE, 2011)
Time-dependent effects are significant for the design of range of concrete structures. Reliable data for creep and shrinkage properties of concrete and analytical procedures are needed to account for these effects. A number ...
Experimental investigation of basic concrete properties for 3D printing technology
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
The aim of this paper is an experimental investigation of fresh concrete properties of the mixture designed for 3D printing. Different mixtures with and without chemical additions (superplasticizer and hydration controller) ...
Uticaj zamene cementa krečnjačkim filerom na svojstva betona
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
U radu su prikazana eksperimentalna ispitivanja jedne vrste zelenih betona kod kojih je Portland cement zamenjen sa dve vrste krečnjačkog filera istog porekla i mineraloškog sastava, a različite finoće mliva. Projektovano ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Resistance of concrete to carbonation and chloride ingress: testing results and service life prediction
(IRMA, 2018)
Reinforcement corrosion due to carbonation and chloride ingress is one of the main deterioration mechanisms of reinforced concrete structures. There is a special concern about concrete structures with a very long demanded ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...