Претраживање
Приказ резултата 31-40 од 78
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
FE validation of the equivalent diameter calculation model for grouped headed studs
(Techno Press, 2018)
Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Supercritical flow in circular conduit bends
(Taylor and Francis Ltd., 2015)
A complex flow pattern occurring in a circular conduit bend with supercritical flow has been studied. The main objective was to obtain reliable criteria for prediction of the onset of helical and choking flow, in order to ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Study of Fly Ash in Making Cementitious Composites
(Applied Mechanics and Materials, 2015)
Applications of fly ash in building industry have very important and relevant problems of origin which are discussed in this paper. Authors have performed tests on mortar, plain concrete and Self Compacting Concrete (SCC) ...
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...
Fatigue damage detection in composite rods using fiber optic intensity based sensors
(Trans Tech Publications Ltd, 2004)
An application of the embedded intensity based fiber optic sensors (FOS) for fatigue damage detection in cantilevered composite rods is presented. During the fatigue test with constant amplitude of oscillations, the ...