Претраживање
Приказ резултата 1-10 од 190
Thermomechanical behavior of bio-fiber composite thermal insulation panels
(Elsevier, 2020)
The thermomechanical properties of the bio-fiber composite, as material for the production of thermal insulation panels, were evaluated. The observed mixtures were composed of Miscanthus X giganteus bio-fibers, mineral ...
Cathode Ray Tube Waste Glass in Concrete Preparation - Increasing Sustainability
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2023)
The construction sector is responsible for approximately 39% of energy use and process-related carbon dioxide emissions. Mixing waste materials into concrete, as a substitute for cement
and/or aggregate, increases energy ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
New Eurocode 4 design rules for composite beams with precast concrete slabs
(Ernest & Sohn a Willey Brands, 2023)
As members of Project Team SC4.T5, the authors of this paper present the main outcomes from the work that isintended for implementation within the second generation of Eurocode 4. General design and application ...
Design of concrete structures according to Eurocode 2 and BAB 87: comparison of basic calculations
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2022)
Structural Eurocodes have superseded national design codes in a number of countries. The education
of engineers is necessary for quick and successful adaptation to new standards. Qualified institutions
should organize ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...