Претраживање
Приказ резултата 51-60 од 168
Long-term behavior of continuous girders made from precast elements
(TTEM journal / Tecnics Technologies Education Management, 2014)
Glulam beams reinforced with internally positioned CFRP plates
(MASE - Macedonian Association of Structural Engineers, Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
In recent years the use of fiber reinforced polymer (FRP) composites for strengthening and repairing structural members has significantly increased. This paper presents an experimental study carried out in order to investigate ...
Experimental Investigation of Cracked End-notched Glulam Beams Repaired with GFRP bars
(Slovak Forest Products Research Institute, 2019)
In this paper, an experimental research on bending behaviour of end-notched glulam beams and their bending behaviour after repairing with glass fibre reinforced polymer (GFRP) bars is presented. Altogether five glulam beams ...
05.18: Maximum chord slenderness ratio of compressed stainless steel closely spaced built-up members
(CE/papers, Special Issue: Proceedings of Eurosteel 2017, 2017)
Static behaviour of bolted shear connectors with mechanical coupler embedded in concrete
(Techno Press, 2018)
The research of shear connectors composed from mechanical couplers with rebar anchors, embedded in concrete, and steel bolts, as a mean of shear transfer in composite connections is presented in the paper. Specific issues ...
Verification of deflection according to Eurocode 2
(Wiley-Blackwell, 2017)
Code provisions for a simplified check of the long-term deflection of concrete structures are generally developed for predefined values of the relevant input parameters. Deflection calculation may be of interest to account ...
Out-of-plane behaviour of loadbearing and non-structural masonry walls during recent earthquakes
(University of Zagreb ,Faculty of Civil Engineering, 2021)
Recent earthquakes in Balkan, including the September 21 and November 26, 2020 Albania
earthquakes, March 22, 2020 Zagreb earthquake, and the December 29, 2020 Petrinja, Croatia
earthquakes had devastating consequences ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete
(PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources, 2018)
Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is ...
08.30: Experimental investigation and specific behaviour of X-HVB shear connectors in prefabricated composite decks
(ce/papers, 2017)
Construction industry is constantly facing new demands towards fast construction and smallest possibly quantity of work at the construction site. These increasing demands, in the field of composite construction of buildings ...