Претраживање
Приказ резултата 1-10 од 13
Application of Copper Mining Waste in Radionuclide and Heavy Metal Immobilization
(Wiley-VCH GmbH, Weinheim, 2021)
Copper slag flotation tailings (CSFT), as the end waste from copper mining, are evaluated for radionuclide and heavy metal immobilization. Characterization of CSFT based on grain size and mineral composition, surface ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Experimental investigation of end-notched glulam beams reinforced with GFRP bars
(Springer Nature, 2022)
End-notched timber beams can have a significant decrease in load-carrying capacity as a consequence of stress concentration due to height reduction at the supports. To prevent crack opening and its propagation at the ...
Selection of wastewater treatment technology: AHP method in multi-criteria decision making
(MDPI, Basel, Switzerland, 2023)
Wastewater treatment is a process that reduces pollution to those quantities and concentrations at which purified wastewater is no longer a threat to human and animal health and safety and does not cause unwanted changes ...
Service Life Design of Concrete Structures Made of High-Volume Limestone Powder Concrete—Case of the Carbonation-Induced Corrosion
(MDPI, Basel, Switzerland, 2023)
One of the paths to CO2 emissions reduction in the concrete industry is to use low-clinker cements, providing at the same time the performance of concrete that is adequate for application in concrete structures. This paper ...
Extension of the ζ-method for calculating deflections of two-way slabs based on linear elastic finite element analysis
(wileyonlinelibrary.comfib. International Federation for Structural Concrete, 2021)
Deflections are among the most complex aspects of reinforced concrete behavior.
Furthermore, deflection control is increasingly a governing criterion in
design, especially in the case of two-way members such as flat slabs ...
Experimental Investigation of Cracked End-notched Glulam Beams Repaired with GFRP bars
(Slovak Forest Products Research Institute, 2019)
In this paper, an experimental research on bending behaviour of end-notched glulam beams and their bending behaviour after repairing with glass fibre reinforced polymer (GFRP) bars is presented. Altogether five glulam beams ...
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Image processing for hydraulic jump free-surface detection: coupled gradient/machine learning model
(IOP, 2020)
High-frequency oscillations and high surface aeration, induced by the strong turbulence, make water depth measurement for hydraulic jumps a persistently challenging task. The investigation of the hydraulic jump behaviour ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...