Претраживање
Приказ резултата 1-10 од 24
Image processing for hydraulic jump free-surface detection: coupled gradient/machine learning model
(IOP, 2020)
High-frequency oscillations and high surface aeration, induced by the strong turbulence, make water depth measurement for hydraulic jumps a persistently challenging task. The investigation of the hydraulic jump behaviour ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Influence of Loading Cracks on the Carbonation Resistance of RC elements
(Elsevier, 2019)
In reinforced concrete (RC) structures, carbonation induced corrosion is one of the most significant durability issues. A very important factor that affects the carbonation process is the appearance of cracks in RC structures. ...
Numerical study of vibrations induced by horizontal-axis wind turbine on a steel building
(Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2019)
One of the most important acceptance issues regarding the implementation of small-scale wind turbines in urban environments is related to human comfort. Turbine-induced vibrations can have a large influence on small-scale ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Model for practical carbonation depth prediction for high volume fly ash concrete and recycled aggregate concrete
(Elsevier, 2019)
The reuse of industrial residue streams such as fly ash (FA) or waste materials such as recycled concrete aggregate (RCA) can be beneficial both from an economic and an ecological point of view. Extensive research, ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Alkali-activated concrete with Serbian fly ash and its radiological impact
(Elsevier, 2016)
The present paper reports the results of a study on different types of fly ash from Serbian coal burning power plants and their potential use as a binder in alkali-activated concrete (AAC) depending on their radiological ...