Претраживање
Приказ резултата 1-10 од 42
Radiological and material characterization of high volume fly ash concrete
(Journal of Environmental Radioactivity, 2016)
The main goal of research presented in this paper was the material and radiological characterization of high volume fly ash concrete (HVFAC) in terms of determination of natural radionuclide content and radon emanation and ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Alkali-activated concrete with Serbian fly ash and its radiological impact
(Elsevier, 2016)
The present paper reports the results of a study on different types of fly ash from Serbian coal burning power plants and their potential use as a binder in alkali-activated concrete (AAC) depending on their radiological ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
A database on flexural and shear strength of reinforced recycled aggregate concrete beams and comparison to Eurocode 2 predictions
(Construction and Building Materials, 2016)
A comprehensive database of recycled aggregate concrete and companion natural aggregate concrete beams’ flexural and shear strength was compiled from 217 experimental results. Strict criteria were applied to determine the ...