Претраживање
Приказ резултата 1-10 од 15
Experimental investigation of compressed stainless steel angle columns
(International Colloquium on Stability and Ductility of Steel Structures, 2019)
This paper presents the experimental programme of an extensive research project that deals with analysing the behaviour of compressed stainless steel columns with equal angle sections. The research focuses on different ...
Fiber optic sensor applications for structural health monitoring
(Zbornik radova / Treći srpski kongres o putevima, 2018)
The monitoring of civil and geotechnical structures requires a variety of different measurement tasks that require different types of sensing systems. Fiber optic sensors can be used in a variety of applications and many ...
Image Processing for Hydraulic Jump Free-Surface Detection
(IAHR, 2019)
Hydraulic jumps exhibit a high degree of free-surface oscillations, triggered by intense turbulence and aeration.
These processes are difficult to model numerically and are frequently investigated on a scale model. ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...