Претраживање
Приказ резултата 21-30 од 42
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Deflection control for reinforced recycled aggregate concrete beams: Experimental database and extension of the fib Model Code 2010 model
(Structural Concrete, 2019)
Recycled aggregate concrete (RAC) has emerged as a viable solution for
solving some of the environmental problems of concrete production.
However, design guidelines for deflection control of reinforced RAC
members have ...
Long-term behaviour of reinforced beams made with natural or recycled aggregate concrete and high-volume fly ash concrete
(Elsevier, 2018)
Six simply supported reinforced concrete beams were tested under sustained loads for 450 days. The beams were made from natural aggregate concrete (NAC), recycled aggregate concrete (RAC) and high-volume fly ash concrete ...
Shear behaviour of recycled aggregate concrete beams with and without shear reinforcement
(Engineering Structures, 2017)
An experimental study of the shear behaviour of recycled aggregate concrete (RAC) beams with and without shear reinforcement is presented. Nine full-scale simply supported beams were loaded in four-point bending tests until ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...