Претраживање
Приказ резултата 31-40 од 42
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
A database on flexural and shear strength of reinforced recycled aggregate concrete beams and comparison to Eurocode 2 predictions
(Construction and Building Materials, 2016)
A comprehensive database of recycled aggregate concrete and companion natural aggregate concrete beams’ flexural and shear strength was compiled from 217 experimental results. Strict criteria were applied to determine the ...
Environmental assessment of green concretes for structural use
(Journal of Cleaner Production, 2017)
This paper presents a comparative environmental assessment of several different green concrete mixes
for structural use. Four green concrete mixes were compared with a conventional concrete mix: recycled
aggregate concrete ...
Prediction model for calculation of the limestone powder concrete carbonation depth
(Elsevier Ltd, 2024)
The efficient way to mitigate the impact of the concrete industry on climate change is to reduce the clinker content in the concrete mix. Beside incorporating supplementary cementitious materials (SCMs), it is possible to ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Stability criteria for stainless steel equal-leg angle columns
(Proceedings in Civil Engineering, THE 8th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING – SCIENCE AND PRACTICE" GNP 2022 – Kolašin, Montenegro, 8-12 March 2022, 2022)
Nowadays, the explicit codified criteria for design of centrically compressed stainless steel columns with equal-leg angle sections are absent in Europe. A comprehensive scientific investigation has therefore been undertaken ...
Different Profiled Sheeting Configurations in Steel-Concrete Composite Beams
(Ernst & Sohn GmbH, 2022)
For obtaining shear resistance of a welded headed stud in profiled steel sheeting, EN 1994-1-1:2004 defines reduction factors that should be multiplied with the resistance of a headed stud in a solid concrete slab. Two ...
Experimental responses of compressed i-section short columns with web openings
(International scientific conference planning, design, construction and building renewal, iNDiS 2023, 16 – 17 November, Fruške Terme, Novi Sad, 2023)
This paper reports the experimental study on compressed I-section short columns with
web openings aimed at providing insight on the specific mechanical behaviour underlying
the local buckling of the web panel around the ...