Претраживање
Приказ резултата 711-719 од 719
Numerical modelling of end-notched glulam beams reinforced with screws
(MASE - Macedonian Association of Structural Engineers, 2019)
Load carrying capacity of solid timber and glued laminated timber (glulam) beams is significantly decreased if there are notches made at the supports. Sudden change in cross-section height (notch) results in deviation of ...
Statistička analiza rezultata ispitivanja fizičko-mehaničkih svojstava kontrolnih betonskih kocki
(Tehnika, 2019)
Cilj ovog istraživanja je prikupljanje, obrada i statistička analiza rezultata ispitivanja uzoraka betonskih kocki koji su ispitani u Laboratoriji za materijale Građevinskog fakulteta u Beogradu prema standardu SRPS ISO ...
А practical method for strut-and-tie modelling of the bridge pile cap
(INTERNATIONAL SCIENTIFIC CONFERENCE PLANNING, DESIGN, CONSTRUCTION AND BUILDING RENEWAL - INDIS 2023, 2023)
Pile cap is a typical example of a discontinuity region, where the classical beam theory does not apply. Therefore, strut-and-tie (STM) model is considered appropriate for the analysis of pile caps. Although, the strut-and-tie ...
Contribution of strain-hardening cementitious composites (SHCC) to shear resistance in hybrid reinforced concrete beams
(Faculty of Civil Engineering, University of BelgradeSociety for Materials and Structures Testing of SerbiaAssociation of Structural Engineers of Serbia, 2023)
Strain Hardening Cementitious Composite (SHCC) is an innovative type of fibrereinforced
cement-based composite that has superior tensile properties. Because
of this, it holds the potential to enhance the shear capacity ...
Energy, ecological and economic aspects of improvement of the dwelling housing in Belgrade
(Beograd : Arhitektonski fakultet, 2010)
The main concern of this research is building refurbishment. Different possibilities of energy performances improvement of existing dwelling housing in the settlement Konjarnik, Belgrade, Serbia, are estimated from energy ...
Improved Serviceability and Environmental Performance of One-Way Slabs through the Use of Layered Natural and Recycled Aggregate Concrete
(MDPI, 2020)
Recycled aggregate concrete (RAC), i.e., concrete produced with recycled concrete aggregate
(RCA) has been heavily investigated recently, and the structural design of RAC is entering into
design codes. Nonetheless, the ...
ECO2 framework assessment of limestone powder concrete slabs and columns
(Elsevier, 2022)
Producing limestone powder requires comparably far less energy than the production of ordinary
Portland cement (OPC), making it a promising sustainable solution for partial replacement of OPC
in concrete. Lower production ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...
Sustainability assessment of recycled aggregate concrete structures: A critical view on the current state-of-knowledge and practice
(Wiley, 2023)
The environmental impacts of activities such as raw material extraction, construction
of infrastructure, and demolition, place construction as one of the
sectors that exert the highest pressures on the environment, ...