Претраживање
Приказ резултата 21-30 од 50
On the Flow over High-rise Building for Wind Energy Harvesting: An Experimental Investigation of Wind Speed and Surface Pressure
(MDPI, 2020)
The human migration from rural to urban areas has triggered a chain reaction causing the spiking energy demand of cities worldwide. High-rise buildings filling the urban skyline could potentially provide a means to improve ...
Performance of RC frames in 26.11.2019. Albania earthquake: effects of irregularities and detailing
(Society for Materials and Structures Testing of Serbia, Belgrade, SerbiaUniversity of Belgrade Faculty of Civil Engineering, Belgrade, SerbiaAssociation of Structural Engineers of Serbia, Belgrade, Serbia, 2021)
The collapse and damage of large number of buildings during the November 26,
2019 (Mw 6,4) Albania earthquake caused 51 fatalities and injuries to at least 910
people. Most of collapsed or heavily damaged ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...