Претраживање
Приказ резултата 31-40 од 79
Elastic critical load of longitudinally unstiffened I-girders subjected to patch loading
(Association of Structural Engineers of Serbia, 2022)
The paper considers the elastic critical load of longitudinally unstiffened I-girders subjected to a localized load of variable length in the plane of the web. In the current regulations, the contribution of the patch ...
Influence of stiffener and flange on elastic critical load of i-girders subjected to patch loading
(MASE Macedonian Association of Structural Engineering, 2022)
The paper considers the influence of patch load length, flange thickness, and stiffener's characteristics
on the behaviour of steel plate girders subjected to patch loading in terms of elastic stability. The aim is
to ...
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Effect of Inter-panel Connections on Modal Properties of Cross-Laminated Timber Floors
(International Conference on Experimental Vibration Analysis for Civil Engineering Structures EVACE, Politecnico di Milano, Italy, August 30 – September 1, 2023S 2023, 2023)
Cross-laminated timber (CLT) floors are typically composed of prefabricated CLT panels assembled on a construction site. The actual connections are commonly disregarded at design stage. CLT floors are modelled either as a ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Experimental modal analysis of cross-laminated timber floors
(EURODYN 2023, XII International Conference on Structural Dynamics, 02-05 July 2023, Delft, The Netherlands, 2023)
Cross-laminated timber (CLT) floors have gained in popularity due to their outstanding strength,
aesthetic appeal, good fire resistance, and high level of prefabrication. However, due to their
high stiffness-to-weight ...
A Preisach Model for The Lead-Rubber Bearing Hysteresis Loop
(8th International Conference of Contemporary Achievements in Civil Engineering, Subotica, Serbia, 2021)
Lead-rubber bearings are often used as isolation/dissipation devices in the bridge structures, as they provide both, period shift and increased damping in the structure, reducing significantly the seismic forces and ...
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...