Претраживање
Приказ резултата 181-190 од 206
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Faktori interakcije šipova u grupi pod dejstvom horizontalnog opterećenja proizvoljnog pravca
(Građevinski Kalendar, 2021)
Konstrukcije vetroturbina, mostova, industrijskih dimnjaka, potpornih zidova i sl. mogu biti izložene značajnim horizontalnim opterećenjima iz različitih izvora. Ove konstrukcije su često fundirane na grupama šipova. Efekti ...
Numerical procedure for stability calculation in inelastic domain
(University Ss. Cyril and Methodius, Faculty of Civil Engineering, Skopje, 2019)
The problems of instability of steel frame structures have been of interest to many investigations for a long time. The fast development of computer technology has created the possibility of a complete solution to such a ...
Influence of initial geometrical imperfections on thermal stability of laminated composite plates using layerwise finite element
(www.elsevier.com/locate/compstruct, 2022)
In this paper, the influence of initial geometrical imperfections on thermal stability of laminated composite plates using Layer wise plate model is presented. The mathematical model assumes layer wise variation of in-plane ...
Moguće uštede primenom energetski efikasnih građevinskih materijala za omotače potkrovlјa
(Savez energetičara, 2008)
Zbog nedostatka stanova, zahvaljujući zakonskim rešenjima koja su to omogućavala, mnogi podstanari su svoje stambeno pitanje rešavali adaptacijom tavanskih prostora, ili nadziđivanjem postojećih zgrada. Nadziđivanja od ...
Numerical Modeling of Two Adjacent Interacting URM Structures
(IPSI, Belgrade, 2024)
Masonry structures in addition to their long heritage are still widely used in civil engineering practice. It should be emphasized that a lot of research has already been done on the seismic behavior of masonry structures. ...