Search
Now showing items 31-40 of 57
Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls
(Engineering Structures, 2023)
Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural ...
Influence of patch load length on strengthening effect in steel plate girders
(Journal of Constructional Steel Research, 2022)
The present paper aims to numerically investigate the influence of patch load length related to various geometric parameters on the patch loading resistance of steel plate girders. Geometric parameters such as the web ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Unfavorable imperfection shapes in steel plate girders for web local crippling
(Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021, 2021)
The paper reports a numerical investigation and determination of unfavorable geometric imperfection shapes in steel plate girders subjected to concentrated compressive forces by means of the ultimate limit state. This load ...
Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing
(Engineering Structures, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous ...
Methodology of calculations for landslide stabilisation by piles
(Macedonian association forgeotechnics, 2022)
Klizišta u Srbiji, u najvećem broju slučajeva, jako zavise od geoloških uslova u terenu i svako klizište ima svoje specifičnosti koje moraju da se odrede geotehničkim istraživanjima. Stoga su u radu prvo prikazane osnovne ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...