Претраживање
Приказ резултата 1-10 од 292
Pravilne konkavne kupole druge vrste
(Novi Sad: Fakultet tehničkih nauka, 2006)
The term cupola stands for a polyhedron consisting of two regular polygons: n-gon and 2n-gon in parallel planes, connected by an alternating series of squares and equilateral triangles, ie. Johnsonsolids J3, J4 and J5. ...
Accuracy Evaluation of Creep and Shrinkage Calculation Methods According to EC4
(4th International Conference Civil Engineering Science and Practice, Zabljak, 20. 2. 2012, 2012)
In the paper, the creep and shrinkage calculation methods for composite steel-concrete
beams are presented. The approximate methods AAEM, EM and methods according to
Eurocode 4, as well as, the exact method based on the ...
Analysis of Traffic Induced Building Vibrations Using Spectral Element Method
(Third Serbian (28th Yu) Congress on Theoretical and Applied Mechanics, 2011)
In this paper, the effects of traffic induced ground vibrations on the three frame buildings of different
height are analyzed. The structures are subjected to horizontal and vertical ground vibrations which were measured
in ...
Resistance of Composite Column to Compression and Bending
(Proceedings of the 14th International Symposium of MASE, Struga, Makedonija, 28. septembar 2018, 2011)
Design of the composite steel-concrete columns subjected to compression and bending, according to Eurocode
4, is shown in the paper. The effects of imperfections in the axial compression are taken into account
indirectly ...
Zlatni presek i pravilne konkavne bikupole druge vrste
(Novi Sad: Fakultet tehničkih nauka, 2006)
Zlatni presek (racio) predstavlja odnos između strane pravilnog pentagona i njegove dijagonale, a takođe se dovodi u vezu sa susednim članovima Fibonacijevog niza. Istraživaem i upoređivanjem metričkih parametara konkavnih ...
Computation of flow separations from bridge girders and effects on flutter derivatives
(Meteorological Institute, CEN, University of Hamburg, Hamburg, 2014)
The widely used formulation of aeroelastic forces presented in the work of Scanlan and Tomko (1971) relies on the frequency dependent coefficients - flutter derivatives and wind tunnel experiments as their identification ...
Axial Strength Prediction of Square CFST Columns Based on The ANN Model
(First Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2022)
Due to numerous advantages, concrete-filled steel tubular (CFST) columns have an increasingly important role in the civil engineering industry. Because of the expensive experimental testing of these members, it is beneficial ...
Effects of Creep and Shrinkage on Deflections of Continuous Composite Beams
(Proceedings of Abstracts IConSSM 2011, The 3rd International Congress of Serbian Society of Mechanics, Vlasina lake, Serbia, 5-8 July 2011, 2011)
Creep and shrinkage of concrete affect the behavior of steel-concrete composite
beams and should be taken into account in the analysis of these structures. A number of
methods which have different level of accuracy are ...
Experimental modal analysis of cross-laminated timber floors
(EURODYN 2023, XII International Conference on Structural Dynamics, 02-05 July 2023, Delft, The Netherlands, 2023)
Cross-laminated timber (CLT) floors have gained in popularity due to their outstanding strength,
aesthetic appeal, good fire resistance, and high level of prefabrication. However, due to their
high stiffness-to-weight ...
Concave Pyramids of Second Sort -The Occurrence, Types, Variations
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Correspondingly to the method of generating the Concave Cupolae of second sort, the Concave Pyramids of second sort have the similar logic of origination, and their counterpart in regular faced convex pyramids (tetrahedron, ...