Претраживање
Приказ резултата 1-10 од 20
Numerical simulation of 3D flow in right-angled confluences with bed elevation discordance in both converging channels
(Elsevier, 2016)
The paper studies a combined effect of bed steps (BS) in both converging channels on the 3D flow in a confluence with α = 90o. Nine combinations of bed elevation discordance ratio values in the two channels are analysed. ...
Effect of bed elevation discordance on momentum-flux from tributary flow and parameter values in 1d confluence models / Uticaj podvodnih kaskada na raspored protoka količine kretanja na ušću i vrednosti parametara u linijskim modelima ušća
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2016)
Bathymetric surveys in confluences of both alluvial and mountaneous rivers have shown that a bed step at a tributary entrance to the confluence is a common morphological feature and that it may also develop in the main-river. ...
Numerical simulation of the three-dimensional flow at the confluence of the Sava and Danube Rivers
(Research Publishing Services, 2006)
In this paper, the confluence hydrodynamics at the mouth of the Sava and Danube Rivers in
the city of Belgrade is analysed by means of the three-dimensional numerical model. The
confluence offers excellent possibilities ...
Application of 3D numerical models in confluence hydrodynamics modelling
(University of Illinois at Urbana-Champaign, 2012)
In this paper performance of the SSIIM2 model (3D finite-volume model with the k-ε-type turbulence model closure) in confluence hydrodynamics modelling is assessed using the published experimental ...
Can a 3D-Numerical Model be a Substitute to a Physical Model in Estimating Parameters of 1D-Confluence Models?
(Universidade do Porto, Faculdade de Engenharia, 2014)
A possibility of using a 3D-numerical model instead of a more expensive physical one for estimation of parameters in 1D-confluence models is considered. A set of existing experimental data from 90º confluence is used for ...
Numerical Simulation of 3D Flow at Right-angled Confuence with and without Upstream Planform Curvature
(Chemical Industry Press, Beijing, 2010)
This paper aims at studying the effect of upstream planform curvature on the flow in the confluence hydrodynamics zone. To do this, a 3D numerical model is used for simulation of flow at right-angled
confluences with ...
Numerical simulation of 3D flow in right-angled confluences with bed elevation discordance in both converging channels
(Elsevier Ltd, 2016)
The paper studies a combined effect of bed steps (BS) in both converging channels on the 3D flow in a confluence with alpha = 90 degrees. Nine combinations of bed elevation discordance ratio values in the two channels are ...
Comparative analysis of the results obtained with 3d orthogonal and non-orthogonal grids in the 3d-flow models: Part 1 / Uporedna analiza rezultata dobijenih primenom ortogonalnih ineortogonalnih mreža u modelima prostornog tečenja - deo l
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2006)
Application of orthogonal and non-orthogonal grids in numerical models of the three-dimensional flow is considered. A river confluence is chosen as an example due to strong three-dimensional flow effects occurring at the ...
Numerical study of 3D flow at right-angled confluences with and without upstream planform curvature
(IWA Publishing, 2013)
The purpose of this paper is to study the individual and combined effect of upstream planform curvature and difference in bed elevations at the tributary entrance to the confluence on the flow in the confluence hydrodynamics ...
Numerical simulation of 3D flow at 90o straight-channel confluence with bed elevation discordance
(TuTech Verlag, TuTech Innovation GmbH, 2012)
The paper aims at studying the effect of difference in bed elevations between the tributary and main canals (∆zT) on the flow in the confluence hydrodynamics zone. To do this, a 3D numerical model is used for flow simulation ...