Search
Now showing items 91-100 of 107
Experimental and numerical analysis of a walls made from aerated concrete blocks exposed to fire
(Proceedings of the 19 th international symposium of MASE, April 2022., 2022)
ABSTRACT
In this paper solution of a non-stationary one dimensional (1D) heat conduction problem has been presented. The finite difference method, i.e. by applying energy balance has been used. The finite difference method ...
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19 th international symposium of MASE, April 2022., 2022)
ABSTRACT
In this paper a comparative analysis of thermal behavior of six partition walls with different thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved aerated concrete blocks ...
Modeling Indoor Particulate Matter and Small Ion Concentration Relationship-A Comparison of a Balance Equation Approach and Data Driven Approach
(MDPI, 2020)
In this work we explore the relationship between particulate matter (PM) and small ion (SI) concentration in a typical indoor elementary school environment. A range of important air quality parameters (radon, PM, SI, ...
Using of low cost moisture sensors in laboratory experiments
(University of Banja LukaFaculty of Architecture, Civil Engineering and Geodesy, 2022)
Soil moisture is one of crucial parameters in modeling and analysis of groundwater flow.
Measurement of soil water dynamics improves the understanding of processes and is vital for good
groundwater flow model calibration. ...
Long-Term Thermal Stress Analysis and Optimization of Contraction Joint Distance of Concrete Gravity Dams
(MDPI, 2022)
Results of the conducted research aiming to demonstrate the methodology of optimization of dam monolith length (distance between contraction joints), through monitoring the thermal tensile stresses during construction and ...
Influence of material surface roughness on backscattering in laser scanning
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2022)
In this paper, the possibility of applying Kirchhoff 's scalar approximation model for determining the backscattering coefficient from rough surfaces is investigated. Surfaces of dielectric and metallic materials, which ...
The third logarithmic coefficients for the class S
(Scientific and Technological Research Council of Turkey (TUBITAK) - Turkish Academic Network and Information Center (ULAKBIM), 2020)
In this paper we give an upper bound of the third logarithmic coefficient for the class $\mathcal{S}$ of univalent functions in the unit disc.
Uniaxial compressive strength test before and after standard fire test on rock mass
(Engineering problems in soft rock / Fifth symposium of the Macedonian Association for Geotechnics, 2022)
The paper presents uniaxial compressive strength test according to SRPS EN 1926. Uniaxial
compressive strength test was performed on 12 identical cube-shaped specimen’s dimensions 70 mm x
70 mm x 70 mm, which are made ...
Tilings with diamond, star and pineapple shapes based on the geometry of the regular pentagon
(Serbian Society for Geometry and Graphics (SUGIG)Faculty of Mechanical Engineering, University of Belgrade, 2021)
This paper presents a gallery of tessellations created by combining the following equilateral shapes: diamonds and stars, which can be further assembled into a pineapple shape. These three shapes can be decomposed into ...