TY  - CONF
AU  - Bogdanović, Jelena
AU  - Dragović, Magdalena
AU  - Čučaković, Aleksandar
AU  - Pejić, Marko
AU  - Forehand, Leslie
AU  - Danilović, Dušan
AU  - Kerton, Charles
AU  - Stević, Zoran
AU  - Yeager, Travis
AU  - Gasper, Jacob
AU  - Martinenko, Anastasija
PY  - 2020
UR  - https://mong2020masbg.wordpress.com/2020/09/06/the-exhibition/
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2261
AB  - This project reveals surveying data and architectural design of the major church in the Studenica monastery complex in Serbia reflected in a variety of 3D models and the analysis of the church interior and exterior. Architecture-driven computational parametric modeling was done by using two types of data: close range photogrammetry and high precision laser scanning. The modeling, based on geometric parameters and other planimetric and volumetric analysis, is devised
during the four-year study as part of the project Parametric Research of the Studenica Church, a UNESCO Heritage Site, as a Model for Advanced Studies of Medieval Architecture. These models allow for better understanding and representation of the proportional, aesthetic and illumination qualities of the Studenica church and for prototyping procedures for examining other medieval domed churches where we lack more detailed references about their architectural design.
PB  - Faculty of Mechanical Engineering, University of Belgrade
C3  - Dimensions reflected - catalog, Accompanying program of the 7th International scientific conference ’’moNGeometrija 2020’’
T1  - Parametric Modeling of the Church in the Studenica Monastery in Serbia
EP  - 16
IS  - Dimensions Reflected – Exhibition of ideas, designs and models
SP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2261
ER  - 

@conference{
author = "Bogdanović, Jelena and Dragović, Magdalena and Čučaković, Aleksandar and Pejić, Marko and Forehand, Leslie and Danilović, Dušan and Kerton, Charles and Stević, Zoran and Yeager, Travis and Gasper, Jacob and Martinenko, Anastasija",
year = "2020",
abstract = "This project reveals surveying data and architectural design of the major church in the Studenica monastery complex in Serbia reflected in a variety of 3D models and the analysis of the church interior and exterior. Architecture-driven computational parametric modeling was done by using two types of data: close range photogrammetry and high precision laser scanning. The modeling, based on geometric parameters and other planimetric and volumetric analysis, is devised
during the four-year study as part of the project Parametric Research of the Studenica Church, a UNESCO Heritage Site, as a Model for Advanced Studies of Medieval Architecture. These models allow for better understanding and representation of the proportional, aesthetic and illumination qualities of the Studenica church and for prototyping procedures for examining other medieval domed churches where we lack more detailed references about their architectural design.",
publisher = "Faculty of Mechanical Engineering, University of Belgrade",
journal = "Dimensions reflected - catalog, Accompanying program of the 7th International scientific conference ’’moNGeometrija 2020’’",
title = "Parametric Modeling of the Church in the Studenica Monastery in Serbia",
pages = "16-16",
number = "Dimensions Reflected – Exhibition of ideas, designs and models",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2261"
}

Bogdanović, J., Dragović, M., Čučaković, A., Pejić, M., Forehand, L., Danilović, D., Kerton, C., Stević, Z., Yeager, T., Gasper, J.,& Martinenko, A.. (2020). Parametric Modeling of the Church in the Studenica Monastery in Serbia. in Dimensions reflected - catalog, Accompanying program of the 7th International scientific conference ’’moNGeometrija 2020’’
Faculty of Mechanical Engineering, University of Belgrade.(Dimensions Reflected – Exhibition of ideas, designs and models), 16-16.
https://hdl.handle.net/21.15107/rcub_grafar_2261

Bogdanović J, Dragović M, Čučaković A, Pejić M, Forehand L, Danilović D, Kerton C, Stević Z, Yeager T, Gasper J, Martinenko A. Parametric Modeling of the Church in the Studenica Monastery in Serbia. in Dimensions reflected - catalog, Accompanying program of the 7th International scientific conference ’’moNGeometrija 2020’’. 2020;(Dimensions Reflected – Exhibition of ideas, designs and models):16-16.
https://hdl.handle.net/21.15107/rcub_grafar_2261 .

Bogdanović, Jelena, Dragović, Magdalena, Čučaković, Aleksandar, Pejić, Marko, Forehand, Leslie, Danilović, Dušan, Kerton, Charles, Stević, Zoran, Yeager, Travis, Gasper, Jacob, Martinenko, Anastasija, "Parametric Modeling of the Church in the Studenica Monastery in Serbia" in Dimensions reflected - catalog, Accompanying program of the 7th International scientific conference ’’moNGeometrija 2020’’, no. Dimensions Reflected – Exhibition of ideas, designs and models (2020):16-16,
https://hdl.handle.net/21.15107/rcub_grafar_2261 .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Stević, Zoran
AU  - Savić, Aleksandar R.
AU  - Volkov-Husović, Tatjana
PY  - 2019
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1997
AB  - In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for quantification of degradation level caused by different impacts and conditions. Based
on the results of image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain optimal procedure that should be followed for estimating degradation caused by cavitation erosion.
PB  - Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd
C3  - PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources
T1  - Examining erosion resistance of ceramics for electrical engineering applications
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1997
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Stević, Zoran and Savić, Aleksandar R. and Volkov-Husović, Tatjana",
year = "2019",
abstract = "In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for quantification of degradation level caused by different impacts and conditions. Based
on the results of image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain optimal procedure that should be followed for estimating degradation caused by cavitation erosion.",
publisher = "Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd",
journal = "PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources",
title = "Examining erosion resistance of ceramics for electrical engineering applications",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1997"
}

Vlahović, M., Martinović, S., Stević, Z., Savić, A. R.,& Volkov-Husović, T.. (2019). Examining erosion resistance of ceramics for electrical engineering applications. in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources
Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd..
https://hdl.handle.net/21.15107/rcub_grafar_1997

Vlahović M, Martinović S, Stević Z, Savić AR, Volkov-Husović T. Examining erosion resistance of ceramics for electrical engineering applications. in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources. 2019;.
https://hdl.handle.net/21.15107/rcub_grafar_1997 .

Vlahović, Milica, Martinović, Sanja, Stević, Zoran, Savić, Aleksandar R., Volkov-Husović, Tatjana, "Examining erosion resistance of ceramics for electrical engineering applications" in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources (2019),
https://hdl.handle.net/21.15107/rcub_grafar_1997 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov-Husović, Tatjana
PY  - 2019
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2003
AB  - Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern arises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Standards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight into the situation. This paper aspires to describe such a procedure on the basis of thorough in-situ investigation and the subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.
PB  - Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd
C3  - PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources
T1  - Quantitative and Qualitative Analysis of Concrete Elements in Wind Park
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2003
ER  - 

@conference{
author = "Savić, Aleksandar R. and Stević, Zoran and Martinović, Sanja and Vlahović, Milica and Volkov-Husović, Tatjana",
year = "2019",
abstract = "Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern arises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Standards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight into the situation. This paper aspires to describe such a procedure on the basis of thorough in-situ investigation and the subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.",
publisher = "Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd",
journal = "PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources",
title = "Quantitative and Qualitative Analysis of Concrete Elements in Wind Park",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2003"
}

Savić, A. R., Stević, Z., Martinović, S., Vlahović, M.,& Volkov-Husović, T.. (2019). Quantitative and Qualitative Analysis of Concrete Elements in Wind Park. in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources
Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd..
https://hdl.handle.net/21.15107/rcub_grafar_2003

Savić AR, Stević Z, Martinović S, Vlahović M, Volkov-Husović T. Quantitative and Qualitative Analysis of Concrete Elements in Wind Park. in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources. 2019;.
https://hdl.handle.net/21.15107/rcub_grafar_2003 .

Savić, Aleksandar R., Stević, Zoran, Martinović, Sanja, Vlahović, Milica, Volkov-Husović, Tatjana, "Quantitative and Qualitative Analysis of Concrete Elements in Wind Park" in PROCEEDINGS 7th International Conference on Renewable Electrical Power Sources (2019),
https://hdl.handle.net/21.15107/rcub_grafar_2003 .

TY  - CONF
AU  - Stević, Zoran
AU  - Rajčić-Vujasinović, Mirjana
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Radovanović, Ilija
AU  - Volkov Husovic, Tatjana
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2020
AB  - U ovom radu su praćeni efekti toplote hidratacije različitih betona upotrebom termovizijske kamere i termodavača priključenih na osmokanalni sistem za monitoring temperature na bazi PC i LabVIEW paketa, razvijen za potrebe ovog istraživanja. Temperatura ambijenta (laboratorije) beležena je i memorisana pomoću posebnog digitalnog instrumenta. Praćenje temperature svežeg betona je trajalo 24h. Vršena su poređenja temperatura površine izmerenih termodavačima i
termovizijskom kamerom. Na osnovu toga uspostavljene su korelaciju koje bi mogle dovesti do pojednostavljenja daljih ispitivanja, posebno masovnih.
PB  - University of East Sarajevo, Faculty of Electrical Engineering
C3  - 17th International Symposium INFOTEH-JAHORINA
T1  - Monitoring efekata toplote hidratacije betona
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2020
ER  - 

@conference{
author = "Stević, Zoran and Rajčić-Vujasinović, Mirjana and Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Radovanović, Ilija and Volkov Husovic, Tatjana",
year = "2018",
abstract = "U ovom radu su praćeni efekti toplote hidratacije različitih betona upotrebom termovizijske kamere i termodavača priključenih na osmokanalni sistem za monitoring temperature na bazi PC i LabVIEW paketa, razvijen za potrebe ovog istraživanja. Temperatura ambijenta (laboratorije) beležena je i memorisana pomoću posebnog digitalnog instrumenta. Praćenje temperature svežeg betona je trajalo 24h. Vršena su poređenja temperatura površine izmerenih termodavačima i
termovizijskom kamerom. Na osnovu toga uspostavljene su korelaciju koje bi mogle dovesti do pojednostavljenja daljih ispitivanja, posebno masovnih.",
publisher = "University of East Sarajevo, Faculty of Electrical Engineering",
journal = "17th International Symposium INFOTEH-JAHORINA",
title = "Monitoring efekata toplote hidratacije betona",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2020"
}

Stević, Z., Rajčić-Vujasinović, M., Savić, A. R., Martinović, S., Vlahović, M., Radovanović, I.,& Volkov Husovic, T.. (2018). Monitoring efekata toplote hidratacije betona. in 17th International Symposium INFOTEH-JAHORINA
University of East Sarajevo, Faculty of Electrical Engineering..
https://hdl.handle.net/21.15107/rcub_grafar_2020

Stević Z, Rajčić-Vujasinović M, Savić AR, Martinović S, Vlahović M, Radovanović I, Volkov Husovic T. Monitoring efekata toplote hidratacije betona. in 17th International Symposium INFOTEH-JAHORINA. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_2020 .

Stević, Zoran, Rajčić-Vujasinović, Mirjana, Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Radovanović, Ilija, Volkov Husovic, Tatjana, "Monitoring efekata toplote hidratacije betona" in 17th International Symposium INFOTEH-JAHORINA (2018),
https://hdl.handle.net/21.15107/rcub_grafar_2020 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2004
AB  - Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure and infrared thermography. Results showed slight decline in compressive, flexural and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.
C3  - PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources
T1  - Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2004
ER  - 

@conference{
author = "Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2018",
abstract = "Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure and infrared thermography. Results showed slight decline in compressive, flexural and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.",
journal = "PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources",
title = "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2004"
}

Savić, A. R., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2018). Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources.
https://hdl.handle.net/21.15107/rcub_grafar_2004

Savić AR, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_2004 .

Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete" in PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources (2018),
https://hdl.handle.net/21.15107/rcub_grafar_2004 .

TY  - CONF
AU  - Volkov-Husović, Tatjana
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1998
AB  - The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum) industry as a filling component of self-compacting concrete is presented in the paper, based on common concrete laboratory tests. The physical and mechanical properties of self-compacting concrete decrease to some extend due to use of ground sulfur, but this concrete remains useful for some building applications.
PB  - Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia
C3  - Proceedings Book of the 1st International Conference The Holistic Approach to Environment
T1  - Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1998
ER  - 

@conference{
author = "Volkov-Husović, Tatjana and Martinović, Sanja and Vlahović, Milica and Savić, Aleksandar R. and Stević, Zoran",
year = "2018",
abstract = "The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum) industry as a filling component of self-compacting concrete is presented in the paper, based on common concrete laboratory tests. The physical and mechanical properties of self-compacting concrete decrease to some extend due to use of ground sulfur, but this concrete remains useful for some building applications.",
publisher = "Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia",
journal = "Proceedings Book of the 1st International Conference The Holistic Approach to Environment",
title = "Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1998"
}

Volkov-Husović, T., Martinović, S., Vlahović, M., Savić, A. R.,& Stević, Z.. (2018). Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production. in Proceedings Book of the 1st International Conference The Holistic Approach to Environment
Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia..
https://hdl.handle.net/21.15107/rcub_grafar_1998

Volkov-Husović T, Martinović S, Vlahović M, Savić AR, Stević Z. Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production. in Proceedings Book of the 1st International Conference The Holistic Approach to Environment. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_1998 .

Volkov-Husović, Tatjana, Martinović, Sanja, Vlahović, Milica, Savić, Aleksandar R., Stević, Zoran, "Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production" in Proceedings Book of the 1st International Conference The Holistic Approach to Environment (2018),
https://hdl.handle.net/21.15107/rcub_grafar_1998 .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1999
AB  - The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum) industry as a filling component of self-compacting concrete is presented in the paper, based on common concrete laboratory tests. The physical and mechanical properties of selfcompacting concrete decrease to some extend due to use of ground sulfur, but this concrete remains useful for some building applications.
PB  - Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia
C3  - Proceedings Book of the 1st International Conference The Holistic Approach to Environment
T1  - Reuse of Waste Sulfur as a Binding Agent in Concrete
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1999
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Savić, Aleksandar R. and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2018",
abstract = "The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum) industry as a filling component of self-compacting concrete is presented in the paper, based on common concrete laboratory tests. The physical and mechanical properties of selfcompacting concrete decrease to some extend due to use of ground sulfur, but this concrete remains useful for some building applications.",
publisher = "Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia",
journal = "Proceedings Book of the 1st International Conference The Holistic Approach to Environment",
title = "Reuse of Waste Sulfur as a Binding Agent in Concrete",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1999"
}

Vlahović, M., Martinović, S., Savić, A. R., Stević, Z.,& Volkov-Husović, T.. (2018). Reuse of Waste Sulfur as a Binding Agent in Concrete. in Proceedings Book of the 1st International Conference The Holistic Approach to Environment
Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia..
https://hdl.handle.net/21.15107/rcub_grafar_1999

Vlahović M, Martinović S, Savić AR, Stević Z, Volkov-Husović T. Reuse of Waste Sulfur as a Binding Agent in Concrete. in Proceedings Book of the 1st International Conference The Holistic Approach to Environment. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_1999 .

Vlahović, Milica, Martinović, Sanja, Savić, Aleksandar R., Stević, Zoran, Volkov-Husović, Tatjana, "Reuse of Waste Sulfur as a Binding Agent in Concrete" in Proceedings Book of the 1st International Conference The Holistic Approach to Environment (2018),
https://hdl.handle.net/21.15107/rcub_grafar_1999 .

TY  - CONF
AU  - Kosić, Boris
AU  - Stojanović, Dijana
AU  - Dragović, Magdalena
AU  - Radosavljević, Marko
AU  - Stević, Zoran
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1951
AB  - Rastući trend reverznog inženjerstva, posebno u oblasti građevine, gde je akcenat na ob-novljivim izvorima energije, neposredno prati aktuelna rešenja mernih insturmenata, kao i softvera za procesuiranje dobijenih podataka, gde je neophodan precizan rezultat snimanja objekta. Terestričko lasersko skeniranje (TLS) i fotogrametrija kao savremene merne metode, daju vrlo precizne podatke o objektu, koji su baza za izradu tehničke dokumentacije, kreiranje 3D virtuelnih prototipova i njihove animacije, 3D štampe, provere geometrije, nosivosti, osunčanosti i drugih vrsta analiza. U ovom radu je dat prikaz rezultata geometrijskih analiza stubova vetrogeneratora i 3D modelovanja sa animaci-jom, koji su dobijeni na osnovu podataka TLS i fotogrametrije, uz poređenje preciznosti, sprovedenog tokom 2018. godine na lokalitetu Alibunar u Srbiji.
AB  - Reverse engineering growing trend, particularly in the domain of civil engineering, additionally focused on renewable energy resources, actively follows technological improvements of measuring instruments, as well as processing software solutions, both necessary for an accurate objects’ survey. Terrestrial laser scanning (TLS) and photogrammetric methods are contemporary standard for ob-taining very accurate point cloud data, as a base for technical documentation, creation of 3D virtual prototypes and their animation, 3D printing, geometry inspection, loads, insolation or other analyzes. This paper presents results of geometric analysis of wind turbine tower, its 3D modeling with animation, based on TLS and photogrammetric data, obtained during 2018 at Alibunar in Serbia.
PB  - Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije
C3  - Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6
T1  - Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora
T1  - Terrestrial laser scanning and 3D modelling of wind-turbine generator
EP  - 220
SP  - 213
VL  - 1
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1951
ER  - 

@conference{
author = "Kosić, Boris and Stojanović, Dijana and Dragović, Magdalena and Radosavljević, Marko and Stević, Zoran",
year = "2018",
abstract = "Rastući trend reverznog inženjerstva, posebno u oblasti građevine, gde je akcenat na ob-novljivim izvorima energije, neposredno prati aktuelna rešenja mernih insturmenata, kao i softvera za procesuiranje dobijenih podataka, gde je neophodan precizan rezultat snimanja objekta. Terestričko lasersko skeniranje (TLS) i fotogrametrija kao savremene merne metode, daju vrlo precizne podatke o objektu, koji su baza za izradu tehničke dokumentacije, kreiranje 3D virtuelnih prototipova i njihove animacije, 3D štampe, provere geometrije, nosivosti, osunčanosti i drugih vrsta analiza. U ovom radu je dat prikaz rezultata geometrijskih analiza stubova vetrogeneratora i 3D modelovanja sa animaci-jom, koji su dobijeni na osnovu podataka TLS i fotogrametrije, uz poređenje preciznosti, sprovedenog tokom 2018. godine na lokalitetu Alibunar u Srbiji., Reverse engineering growing trend, particularly in the domain of civil engineering, additionally focused on renewable energy resources, actively follows technological improvements of measuring instruments, as well as processing software solutions, both necessary for an accurate objects’ survey. Terrestrial laser scanning (TLS) and photogrammetric methods are contemporary standard for ob-taining very accurate point cloud data, as a base for technical documentation, creation of 3D virtual prototypes and their animation, 3D printing, geometry inspection, loads, insolation or other analyzes. This paper presents results of geometric analysis of wind turbine tower, its 3D modeling with animation, based on TLS and photogrammetric data, obtained during 2018 at Alibunar in Serbia.",
publisher = "Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije",
journal = "Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6",
title = "Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora, Terrestrial laser scanning and 3D modelling of wind-turbine generator",
pages = "220-213",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1951"
}

Kosić, B., Stojanović, D., Dragović, M., Radosavljević, M.,& Stević, Z.. (2018). Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora. in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6
Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije., 1, 213-220.
https://hdl.handle.net/21.15107/rcub_grafar_1951

Kosić B, Stojanović D, Dragović M, Radosavljević M, Stević Z. Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora. in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6. 2018;1:213-220.
https://hdl.handle.net/21.15107/rcub_grafar_1951 .

Kosić, Boris, Stojanović, Dijana, Dragović, Magdalena, Radosavljević, Marko, Stević, Zoran, "Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora" in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6, 1 (2018):213-220,
https://hdl.handle.net/21.15107/rcub_grafar_1951 .

TY  - CONF
AU  - Petković, Dušan
AU  - Stojanović, Dijana
AU  - Kosić, Boris
AU  - Radosavljević, Marko
AU  - Stević, Zoran
AU  - Dragović, Magdalena
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1871
AB  - Contemporary visualization techniques rely on new technological achievements which offer information data collection in the form of a three-dimensional model. Such 3D model is significant in the area of cultural heritage protection and specifically in the restoration processes of ruined monuments. The results of applications of both methods, terrestrial laser scanning (TLS) and photogrammetry, is 3D data in the form of point cloud, which is a base for 3D modelling process in adequate software, and accordingly, a creation of an objects’ 3D shape. In this paper, the results of data collecting at the medieval site of the Savinac monastery (twelfth century ), performed in 2018, by using both contemporary methods, is presented. The visualization of this particular site is of the major importance for cultural heritge of Serbia.
PB  - Central Institute for Conservation, Belgrade
PB  - Scientific Association for the Development and Promotion of New Technologies, Sopot
C3  - Proceedings of selected papers and abstracts - The Second Students Scientific International Conference "Multidisciplinary Approach to Contemporary Research"
T1  - The visualization of the medieval site of the Savinac monastery
EP  - 194
SP  - 187
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1871
ER  - 

@conference{
author = "Petković, Dušan and Stojanović, Dijana and Kosić, Boris and Radosavljević, Marko and Stević, Zoran and Dragović, Magdalena",
year = "2018",
abstract = "Contemporary visualization techniques rely on new technological achievements which offer information data collection in the form of a three-dimensional model. Such 3D model is significant in the area of cultural heritage protection and specifically in the restoration processes of ruined monuments. The results of applications of both methods, terrestrial laser scanning (TLS) and photogrammetry, is 3D data in the form of point cloud, which is a base for 3D modelling process in adequate software, and accordingly, a creation of an objects’ 3D shape. In this paper, the results of data collecting at the medieval site of the Savinac monastery (twelfth century ), performed in 2018, by using both contemporary methods, is presented. The visualization of this particular site is of the major importance for cultural heritge of Serbia.",
publisher = "Central Institute for Conservation, Belgrade, Scientific Association for the Development and Promotion of New Technologies, Sopot",
journal = "Proceedings of selected papers and abstracts - The Second Students Scientific International Conference "Multidisciplinary Approach to Contemporary Research"",
title = "The visualization of the medieval site of the Savinac monastery",
pages = "194-187",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1871"
}

Petković, D., Stojanović, D., Kosić, B., Radosavljević, M., Stević, Z.,& Dragović, M.. (2018). The visualization of the medieval site of the Savinac monastery. in Proceedings of selected papers and abstracts - The Second Students Scientific International Conference "Multidisciplinary Approach to Contemporary Research"
Central Institute for Conservation, Belgrade., 187-194.
https://hdl.handle.net/21.15107/rcub_grafar_1871

Petković D, Stojanović D, Kosić B, Radosavljević M, Stević Z, Dragović M. The visualization of the medieval site of the Savinac monastery. in Proceedings of selected papers and abstracts - The Second Students Scientific International Conference "Multidisciplinary Approach to Contemporary Research". 2018;:187-194.
https://hdl.handle.net/21.15107/rcub_grafar_1871 .

Petković, Dušan, Stojanović, Dijana, Kosić, Boris, Radosavljević, Marko, Stević, Zoran, Dragović, Magdalena, "The visualization of the medieval site of the Savinac monastery" in Proceedings of selected papers and abstracts - The Second Students Scientific International Conference "Multidisciplinary Approach to Contemporary Research" (2018):187-194,
https://hdl.handle.net/21.15107/rcub_grafar_1871 .

TY  - CONF
AU  - Čučaković, Aleksandar
AU  - Pejić, Marko
AU  - Dragović, Magdalena
AU  - Stević, Zoran
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3088
AB  - Contemporary trend in reverse engineering in the area of architecture, civil engineering and survey
assumes application of contemporary software tools and measuring devices, where the result –
„state of the art“ of a cultural heritage monument and its terrain surroundings is a point cloud in
referenced 3D coordinate system. Terrestrial laser scanning (TLS), as the measuring method, gives accurate data on an object/terrain, available for further processing (according to professional
needs) and analysis. Contemporary software solutions for point cloud data processing enable
results for the purposes of accurate 2D technical documentation, creation of 3D realistic mesh
models, presentations, animations and other deliverables in overall research processes. This paper presents the results of architectural-geometric analysis of the Kings’ church exterior in Studenica monastery, based on point cloud data provided by TLS at the site during 2017 and partly on existing technical documentation. Kings’ church (originally dedicated to Ss. Ioachim and Anna) is legacy of the king Milutin ( the end of 13th / beginning of 14th c), very modest in dimensions,
almost square shaped in its layout. Its architectural structure is composed as compressed inscribed cross. It belongs to a group of one nave domed churches built by the principles of Byzantine architectural style.
The paper presents 2D projections (cross-sections and characteristic facades) of the church obtained from point cloud results, along with its proportional analysis.
PB  - Central Institute for Conservation, Belgrade
PB  - Association for Ethics and Evaluation in Culture and Science, Belgrade
C3  - Proceedings of the 1st Int. Conf. Trends in Heritology - Industrial and intangible heritage
T1  - Contemporary trend in documentation and analysis of cultural heritage objects
SP  - 159
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3088
ER  - 

@conference{
author = "Čučaković, Aleksandar and Pejić, Marko and Dragović, Magdalena and Stević, Zoran",
year = "2018",
abstract = "Contemporary trend in reverse engineering in the area of architecture, civil engineering and survey
assumes application of contemporary software tools and measuring devices, where the result –
„state of the art“ of a cultural heritage monument and its terrain surroundings is a point cloud in
referenced 3D coordinate system. Terrestrial laser scanning (TLS), as the measuring method, gives accurate data on an object/terrain, available for further processing (according to professional
needs) and analysis. Contemporary software solutions for point cloud data processing enable
results for the purposes of accurate 2D technical documentation, creation of 3D realistic mesh
models, presentations, animations and other deliverables in overall research processes. This paper presents the results of architectural-geometric analysis of the Kings’ church exterior in Studenica monastery, based on point cloud data provided by TLS at the site during 2017 and partly on existing technical documentation. Kings’ church (originally dedicated to Ss. Ioachim and Anna) is legacy of the king Milutin ( the end of 13th / beginning of 14th c), very modest in dimensions,
almost square shaped in its layout. Its architectural structure is composed as compressed inscribed cross. It belongs to a group of one nave domed churches built by the principles of Byzantine architectural style.
The paper presents 2D projections (cross-sections and characteristic facades) of the church obtained from point cloud results, along with its proportional analysis.",
publisher = "Central Institute for Conservation, Belgrade, Association for Ethics and Evaluation in Culture and Science, Belgrade",
journal = "Proceedings of the 1st Int. Conf. Trends in Heritology - Industrial and intangible heritage",
title = "Contemporary trend in documentation and analysis of cultural heritage objects",
pages = "159",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3088"
}

Čučaković, A., Pejić, M., Dragović, M.,& Stević, Z.. (2018). Contemporary trend in documentation and analysis of cultural heritage objects. in Proceedings of the 1st Int. Conf. Trends in Heritology - Industrial and intangible heritage
Central Institute for Conservation, Belgrade., 159.
https://hdl.handle.net/21.15107/rcub_grafar_3088

Čučaković A, Pejić M, Dragović M, Stević Z. Contemporary trend in documentation and analysis of cultural heritage objects. in Proceedings of the 1st Int. Conf. Trends in Heritology - Industrial and intangible heritage. 2018;:159.
https://hdl.handle.net/21.15107/rcub_grafar_3088 .

Čučaković, Aleksandar, Pejić, Marko, Dragović, Magdalena, Stević, Zoran, "Contemporary trend in documentation and analysis of cultural heritage objects" in Proceedings of the 1st Int. Conf. Trends in Heritology - Industrial and intangible heritage (2018):159,
https://hdl.handle.net/21.15107/rcub_grafar_3088 .