Panić, Sonja

Link to this page

Authority KeyName Variants
e26bb9e4-f11c-4916-ba1c-d6f08bc6512e
  • Panić, Sonja (2)
Projects
No records found.

Author's Bibliography

Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types

Savić, Aleksandar; Broćeta, Gordana; Aškrabić, Marina; Panić, Sonja; Vidanović, Ljubomir

(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)

TY  - JOUR
AU  - Savić, Aleksandar
AU  - Broćeta, Gordana
AU  - Aškrabić, Marina
AU  - Panić, Sonja
AU  - Vidanović, Ljubomir
PY  - 2022
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3276
AB  - The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. Concretes with three different aggregate compositions (river, crushed and mixture with coarse recycled aggregate) were mixed using the usual approach, and then two-stage mixing approach (TSMA). Slump and flow, density and temperature were tested on fresh concrete. The compressive strength, flexural, splitting tensile strength, density, ultrasonic pulse velocity, and water absorption was recorded on hardened concrete. Concretes prepared using recycled aggregate, according to all the mentioned tests, can be used as an adequate replacement for concretes prepared using river or crushed aggregate, while the two-phase approach had the greatest effect on the increase of the splitting tensile strength.
PB  - Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H
T2  - Contemporary Materials
T1  - Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
EP  - 83
IS  - 1
SP  - 74
VL  - 13
DO  - 10.7251/COMEN2201074S
ER  - 
@article{
author = "Savić, Aleksandar and Broćeta, Gordana and Aškrabić, Marina and Panić, Sonja and Vidanović, Ljubomir",
year = "2022",
abstract = "The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. Concretes with three different aggregate compositions (river, crushed and mixture with coarse recycled aggregate) were mixed using the usual approach, and then two-stage mixing approach (TSMA). Slump and flow, density and temperature were tested on fresh concrete. The compressive strength, flexural, splitting tensile strength, density, ultrasonic pulse velocity, and water absorption was recorded on hardened concrete. Concretes prepared using recycled aggregate, according to all the mentioned tests, can be used as an adequate replacement for concretes prepared using river or crushed aggregate, while the two-phase approach had the greatest effect on the increase of the splitting tensile strength.",
publisher = "Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H",
journal = "Contemporary Materials",
title = "Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types",
pages = "83-74",
number = "1",
volume = "13",
doi = "10.7251/COMEN2201074S"
}
Savić, A., Broćeta, G., Aškrabić, M., Panić, S.,& Vidanović, L.. (2022). Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types. in Contemporary Materials
Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H., 13(1), 74-83.
https://doi.org/10.7251/COMEN2201074S
Savić A, Broćeta G, Aškrabić M, Panić S, Vidanović L. Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types. in Contemporary Materials. 2022;13(1):74-83.
doi:10.7251/COMEN2201074S .
Savić, Aleksandar, Broćeta, Gordana, Aškrabić, Marina, Panić, Sonja, Vidanović, Ljubomir, "Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types" in Contemporary Materials, 13, no. 1 (2022):74-83,
https://doi.org/10.7251/COMEN2201074S . .

Keyphrases analysis of BIM standards through occurrence of most common BIM uses

Osmokrović, Igor; Panić, Sonja; Nedeljković, Đorđe

(2017)

TY  - CONF
AU  - Osmokrović, Igor
AU  - Panić, Sonja
AU  - Nedeljković, Đorđe
PY  - 2017
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3236
AB  - The 8th PSU-UNS International Conference on Engineering and
Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017
University of Novi Sad, Faculty of Technical Sciences
Abstract: Building Information Modeling (BIM) does
not represent only the virtual model of the facility but a
comperhensive approach consisting of technology,
processes, stakeholders' behavior and accompanying
standards.Given the fast evolution of BIM, this paper is
analysing trends of development of BIM standards
throughout the years by applying the keyphrases analysis
method, for some of the most common BIM uses and
recognizable phrases in BIM industry.
C3  - The 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017 University of Novi Sad, Faculty of Technical Sciences
T1  - Keyphrases analysis of BIM standards through occurrence of most common BIM uses
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3236
ER  - 
@conference{
author = "Osmokrović, Igor and Panić, Sonja and Nedeljković, Đorđe",
year = "2017",
abstract = "The 8th PSU-UNS International Conference on Engineering and
Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017
University of Novi Sad, Faculty of Technical Sciences
Abstract: Building Information Modeling (BIM) does
not represent only the virtual model of the facility but a
comperhensive approach consisting of technology,
processes, stakeholders' behavior and accompanying
standards.Given the fast evolution of BIM, this paper is
analysing trends of development of BIM standards
throughout the years by applying the keyphrases analysis
method, for some of the most common BIM uses and
recognizable phrases in BIM industry.",
journal = "The 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017 University of Novi Sad, Faculty of Technical Sciences",
title = "Keyphrases analysis of BIM standards through occurrence of most common BIM uses",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3236"
}
Osmokrović, I., Panić, S.,& Nedeljković, Đ.. (2017). Keyphrases analysis of BIM standards through occurrence of most common BIM uses. in The 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017 University of Novi Sad, Faculty of Technical Sciences.
https://hdl.handle.net/21.15107/rcub_grafar_3236
Osmokrović I, Panić S, Nedeljković Đ. Keyphrases analysis of BIM standards through occurrence of most common BIM uses. in The 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017 University of Novi Sad, Faculty of Technical Sciences. 2017;.
https://hdl.handle.net/21.15107/rcub_grafar_3236 .
Osmokrović, Igor, Panić, Sonja, Nedeljković, Đorđe, "Keyphrases analysis of BIM standards through occurrence of most common BIM uses" in The 8th PSU-UNS International Conference on Engineering and Technology (ICET-2017), Novi Sad, Serbia, June 8-10, 2017 University of Novi Sad, Faculty of Technical Sciences (2017),
https://hdl.handle.net/21.15107/rcub_grafar_3236 .