TY  - JOUR
AU  - Drobnjak, Siniša
AU  - Božić, Branko
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/922
AB  - The paper describes the results of the positional accuracy assessment of digital topographic maps at scale 1: 25 000 produced by the Serbian Military Geographic Institute (MGI). The test for the horizontal and vertical accuracy compliance of map sheets is done by comparing the planimetric and height coordinates of the ground points to the coordinates of the same points as determined by a check survey of higher accuracy. In this research STANAG 2215 standard was used and the methodology of its use is discussed in detail. The results of positional accuracy assessment for the digital topographic maps at scale 1:25 000 produced by the Military Geographic Institute have confirmed the highest level of accuracy defined by STANAG 2215 standard.
AB  - U radu se opisuju rezultati ocenjivanja položajne tačnosti digitalnih topografskih karata u razmeri 1:25 000, proizvedenih u Vojnogeografskom institutu (VGI) Republike Srbije. Testiranje horizontalne i vertikalne položajne tačnosti pojedinačnih listova karata urađeno je poređenjem planimetrijskih i visinskih koordinata test-tačaka sa korespondentnim tačkama veće tačnosti određenih terenskim premerom. U istaživanju je korišćen standard STANG 2215 i detaljno je opisana njegova metodologija. Rezultati ovog ocenjivanja potvrdili su najviši nivo tačnosti definisan standardom STANAG 2215.
PB  - Univerzitet odbrane u Beogradu - Institut za naučne informacije, Beograd
T2  - Vojnotehnički glasnik
T1  - Evaluation of positional accuracy of digital topographic maps at scale 1:25 000 (DTM25) on the basis of STANAG 2215 standard
T1  - Ocenka pozicionnoj točnosti na cifrovoj topografičeskoj karte masštaba 1:25 000 (TK25), razrabotannoj v sootvetstvii so standartom «STANAG 2215»
T1  - Ocenjivanje položajne tačnosti digitalne topografske karte u razmeri 1:25 000 (DTK25) na osnovu standarda STANAG 2215
EP  - 121
IS  - 1
SP  - 106
VL  - 66
DO  - 10.5937/vojtehg66-14394
ER  - 

@article{
author = "Drobnjak, Siniša and Božić, Branko",
year = "2018",
abstract = "The paper describes the results of the positional accuracy assessment of digital topographic maps at scale 1: 25 000 produced by the Serbian Military Geographic Institute (MGI). The test for the horizontal and vertical accuracy compliance of map sheets is done by comparing the planimetric and height coordinates of the ground points to the coordinates of the same points as determined by a check survey of higher accuracy. In this research STANAG 2215 standard was used and the methodology of its use is discussed in detail. The results of positional accuracy assessment for the digital topographic maps at scale 1:25 000 produced by the Military Geographic Institute have confirmed the highest level of accuracy defined by STANAG 2215 standard., U radu se opisuju rezultati ocenjivanja položajne tačnosti digitalnih topografskih karata u razmeri 1:25 000, proizvedenih u Vojnogeografskom institutu (VGI) Republike Srbije. Testiranje horizontalne i vertikalne položajne tačnosti pojedinačnih listova karata urađeno je poređenjem planimetrijskih i visinskih koordinata test-tačaka sa korespondentnim tačkama veće tačnosti određenih terenskim premerom. U istaživanju je korišćen standard STANG 2215 i detaljno je opisana njegova metodologija. Rezultati ovog ocenjivanja potvrdili su najviši nivo tačnosti definisan standardom STANAG 2215.",
publisher = "Univerzitet odbrane u Beogradu - Institut za naučne informacije, Beograd",
journal = "Vojnotehnički glasnik",
title = "Evaluation of positional accuracy of digital topographic maps at scale 1:25 000 (DTM25) on the basis of STANAG 2215 standard, Ocenka pozicionnoj točnosti na cifrovoj topografičeskoj karte masštaba 1:25 000 (TK25), razrabotannoj v sootvetstvii so standartom «STANAG 2215», Ocenjivanje položajne tačnosti digitalne topografske karte u razmeri 1:25 000 (DTK25) na osnovu standarda STANAG 2215",
pages = "121-106",
number = "1",
volume = "66",
doi = "10.5937/vojtehg66-14394"
}

Drobnjak, S.,& Božić, B.. (2018). Evaluation of positional accuracy of digital topographic maps at scale 1:25 000 (DTM25) on the basis of STANAG 2215 standard. in Vojnotehnički glasnik
Univerzitet odbrane u Beogradu - Institut za naučne informacije, Beograd., 66(1), 106-121.
https://doi.org/10.5937/vojtehg66-14394

Drobnjak S, Božić B. Evaluation of positional accuracy of digital topographic maps at scale 1:25 000 (DTM25) on the basis of STANAG 2215 standard. in Vojnotehnički glasnik. 2018;66(1):106-121.
doi:10.5937/vojtehg66-14394 .

Drobnjak, Siniša, Božić, Branko, "Evaluation of positional accuracy of digital topographic maps at scale 1:25 000 (DTM25) on the basis of STANAG 2215 standard" in Vojnotehnički glasnik, 66, no. 1 (2018):106-121,
https://doi.org/10.5937/vojtehg66-14394 . .

TY  - JOUR
AU  - Drobnjak, Siniša
AU  - Radojčić, Stevan
AU  - Božić, Branko
PY  - 2014
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/558
AB  - Standardization in the field of geographical information related to the definition of the system of collection, preparation, storage, maintenance, presentation and sharing of geographic information. Quality information of available spatial data are vital in the process of selecting a dataset where data value is directly related to its quality. Users of spatial data can choose data from multiple datasets. Therefore. It is necessary to compare the quality of datasets and determine which best meet customer requirements. Digital topographic maps for its visuality, brevity and easy of use have a big advantage over other spatial datasets and is therefore fully justified request for the development of the system of determining, evaluating and impart their quality. The main objective of this paper is to describe the possibilities of application of ISO 19157 'Geographic information - Data quality' standard in technological process of the production of digital topographic maps.
AB  - Standardizacija u oblasti geografskih informacija odnosi se na definisanje sistema prikupljanja, izrade, čuvanja, održavanja, prezentacije i razmene geografskih informacija. Informacije o kvalitetu raspoloživih prostornih podataka od vitalnog su značaja za proces odabira skupa podataka gde je vrednost podataka direktno povezana s njenim kvalitetom. Korisnik prostornih podataka može birati podatke iz više skupova podataka. Zbog toga, neophodno je da se uporedi kvalitet skupova podataka i odredi koji najbolje ispunjavaju zahteve korisnika. Digitalne topografske karte zbog svoje vizuelnosti, sažetosti i jednostavnosti korišćenja imaju velike prednosti nad drugim skupovima prostornih podataka i zbog toga u potpunosti su opravdani zahtevi za razradu sistema utvrđivanja, vrednovanja i saopštavanja njihovog kvaliteta. Osnovni cilj rada je da opiše mogućnosti primene ISO 19157 'Geografske informacije - kvalitet podataka' standarda u tehnološkom procesu izrade digitalnih topografskih karata.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - ISO 19157 standard application in technological process of the production of digital topographic maps
T1  - Primena ISO 19157 standarda u tehnološkom procesu izrade digitalnih topografskih karata
EP  - 937
IS  - 6
SP  - 931
VL  - 69
DO  - 10.5937/tehnika1406931D
ER  - 

@article{
author = "Drobnjak, Siniša and Radojčić, Stevan and Božić, Branko",
year = "2014",
abstract = "Standardization in the field of geographical information related to the definition of the system of collection, preparation, storage, maintenance, presentation and sharing of geographic information. Quality information of available spatial data are vital in the process of selecting a dataset where data value is directly related to its quality. Users of spatial data can choose data from multiple datasets. Therefore. It is necessary to compare the quality of datasets and determine which best meet customer requirements. Digital topographic maps for its visuality, brevity and easy of use have a big advantage over other spatial datasets and is therefore fully justified request for the development of the system of determining, evaluating and impart their quality. The main objective of this paper is to describe the possibilities of application of ISO 19157 'Geographic information - Data quality' standard in technological process of the production of digital topographic maps., Standardizacija u oblasti geografskih informacija odnosi se na definisanje sistema prikupljanja, izrade, čuvanja, održavanja, prezentacije i razmene geografskih informacija. Informacije o kvalitetu raspoloživih prostornih podataka od vitalnog su značaja za proces odabira skupa podataka gde je vrednost podataka direktno povezana s njenim kvalitetom. Korisnik prostornih podataka može birati podatke iz više skupova podataka. Zbog toga, neophodno je da se uporedi kvalitet skupova podataka i odredi koji najbolje ispunjavaju zahteve korisnika. Digitalne topografske karte zbog svoje vizuelnosti, sažetosti i jednostavnosti korišćenja imaju velike prednosti nad drugim skupovima prostornih podataka i zbog toga u potpunosti su opravdani zahtevi za razradu sistema utvrđivanja, vrednovanja i saopštavanja njihovog kvaliteta. Osnovni cilj rada je da opiše mogućnosti primene ISO 19157 'Geografske informacije - kvalitet podataka' standarda u tehnološkom procesu izrade digitalnih topografskih karata.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "ISO 19157 standard application in technological process of the production of digital topographic maps, Primena ISO 19157 standarda u tehnološkom procesu izrade digitalnih topografskih karata",
pages = "937-931",
number = "6",
volume = "69",
doi = "10.5937/tehnika1406931D"
}

Drobnjak, S., Radojčić, S.,& Božić, B.. (2014). ISO 19157 standard application in technological process of the production of digital topographic maps. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 69(6), 931-937.
https://doi.org/10.5937/tehnika1406931D

Drobnjak S, Radojčić S, Božić B. ISO 19157 standard application in technological process of the production of digital topographic maps. in Tehnika. 2014;69(6):931-937.
doi:10.5937/tehnika1406931D .

Drobnjak, Siniša, Radojčić, Stevan, Božić, Branko, "ISO 19157 standard application in technological process of the production of digital topographic maps" in Tehnika, 69, no. 6 (2014):931-937,
https://doi.org/10.5937/tehnika1406931D . .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Božić, Branko
AU  - Drobnjak, Siniša
PY  - 2011
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/397
AB  - The paper analyses some models of rhumb line on the ellipsoid, sphere and map projection. In geodesy and cartography, rhumb line is a complex curve on the earth's surface that crosses every meridian at the same oblique angle. Also, it is called a loxodrome. Specially, this article described some mathematical models of rhumb line on the different surfaces. So, there are some equations and examples how to calculate distance along rhumb line. In the Mercator projection, rhumb line is displayed as line and it is used in navigation traditionally.
AB  - U radu se razmatraju određeni modeli loksodrome na elipsoidu, lopti i projekcionoj ravni. Po definiciji u geodeziji i kartografiji, loksodroma predstavlja krivu liniju na Zemljinoj površi koja prolazi i seče svaki meridijan pod istim uglom. Takođe, ona ima i druge nazive u literaturi. U ovom radu su posebno opisani matematički modeli loksodrome na datim površima. Prikazane su formule za računanje dužina loksodrome na datim površima. U ravni Merkatorove projekcije loksodroma se prikazuje pravom linijom i u navigaciji ima dugu tradiciju i praktičnu primenu.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Mathematical models of rhumb line and their application
T1  - Matematički modeli loksodrome i njihova primena
EP  - 556
IS  - 4
SP  - 551
VL  - 66
UR  - https://hdl.handle.net/21.15107/rcub_grafar_397
ER  - 

@article{
author = "Borisov, Mirko and Božić, Branko and Drobnjak, Siniša",
year = "2011",
abstract = "The paper analyses some models of rhumb line on the ellipsoid, sphere and map projection. In geodesy and cartography, rhumb line is a complex curve on the earth's surface that crosses every meridian at the same oblique angle. Also, it is called a loxodrome. Specially, this article described some mathematical models of rhumb line on the different surfaces. So, there are some equations and examples how to calculate distance along rhumb line. In the Mercator projection, rhumb line is displayed as line and it is used in navigation traditionally., U radu se razmatraju određeni modeli loksodrome na elipsoidu, lopti i projekcionoj ravni. Po definiciji u geodeziji i kartografiji, loksodroma predstavlja krivu liniju na Zemljinoj površi koja prolazi i seče svaki meridijan pod istim uglom. Takođe, ona ima i druge nazive u literaturi. U ovom radu su posebno opisani matematički modeli loksodrome na datim površima. Prikazane su formule za računanje dužina loksodrome na datim površima. U ravni Merkatorove projekcije loksodroma se prikazuje pravom linijom i u navigaciji ima dugu tradiciju i praktičnu primenu.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Mathematical models of rhumb line and their application, Matematički modeli loksodrome i njihova primena",
pages = "556-551",
number = "4",
volume = "66",
url = "https://hdl.handle.net/21.15107/rcub_grafar_397"
}

Borisov, M., Božić, B.,& Drobnjak, S.. (2011). Mathematical models of rhumb line and their application. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 66(4), 551-556.
https://hdl.handle.net/21.15107/rcub_grafar_397

Borisov M, Božić B, Drobnjak S. Mathematical models of rhumb line and their application. in Tehnika. 2011;66(4):551-556.
https://hdl.handle.net/21.15107/rcub_grafar_397 .

Borisov, Mirko, Božić, Branko, Drobnjak, Siniša, "Mathematical models of rhumb line and their application" in Tehnika, 66, no. 4 (2011):551-556,
https://hdl.handle.net/21.15107/rcub_grafar_397 .